NUMECA FINE/Open 9.2 | 8.5 Gb
NUMECA International is delighted to announce the official release new version of FINE/Open With OpenLabs is powerful CFD Flow integrated environment. Release 9.2 - is average 10% speed-up for all generated meshes with HEXPRESS/Hybrid. About Numeca FINE/Open. FINE/Open with OpenLabs is a powerful CFD Flow Integrated Environment dedicated to complex internal and external flows. It can solve any flow, from incompressible to low and high speed flows. It combines completely unstructured hexahedral grids with an efficient preconditioned compressible solver with fast agglomerated multigrid acceleration and adaptation techniques. FINE/Open with OpenLabs allows users to freely develop and exchange physical models in CFD, with a new open approach to CFD. Complex programming tasks are avoided through the usage of an easy meta-language. Users can develop, improve and customize physical and numerical models as for instance: What's new in FINE/Open with OpenLabs 9.2 Our development team worked on different aspects to globally improve the speed of all generated meshes. As a result, a speed-up of 10% can be expected for all cases on average. In addition, particular attention has been put on the automatic local refinement for surfaces to accelerate it even further.
Improvements in the mesh quality for open thin wall configurations have also been tackled.
The distributed parallel version has been upgraded with the capacity to use the enhanced mesh projection method (EXACTMESHING keyword) and the support of SPB and CGNS formats for export.
The computation of Full Non-Matching Boundaries (FNMB) for periodic domains can be performed directly in HEXPRESS/Hybrid: faster time-to-results with a simpler and more integrated workflow.
Custom thermodynamic tables (FINE/Open)
Custom thermodynamic table data can be generated with the new version of NIST Reference Fluid Thermodynamic and Transport Properties Database (REFPROP).
REFPROP 10 is integrated into NUMECA’s tables generator TabGen. The benefits of this new version are:
- Availability of 147 pure fluids
- Support for mixtures with up to 20 components
- New equations of state for some fluids
CPU Booster robustness improvements (FINE/Open)
Speed-up your most complex simulations thanks to the improved robustness of CPU-Booster.
Users get more advanced control on CPU-Booster such as the initial constant CFL for the CFL ramping, compressibility correction for supersonic exhaust jets, additional outputs…
Other improvements
HEXPRESS/Hybrid
- Capacity to smoothly close viscous layers by hanging nodes between 2 tangent surfaces to ensure an optimal quality
- Capacity to intersect mirror planes and geometries based on the triangulation
- New license check option to wait for a free license seat instead of stopping mesh generation (useful for automatic optimization and job scheduling)
FINE/Open with OpenLabs
- Rigid-body motion with 6 degrees of freedom
- Introduction of the CFL ramping for computations without CPU-Booster
- New best practices guide for premixed combustion
About Numeca International Inc. NUMECA International SA develops computational fluid dynamics (CFD) software for the simulation, design, and optimization of fluid flow and heat transfer worldwide. It offers automated and customized flow integrated environments (FINE), including FINE/Turbo for the simulation of rotating and turbomachinery flows; FINE/Open for the simulation of complex internal and external applications; and FINE/Marine for marine applications.
Product: NUMECA FINE/Open with OpenLabsVersion: 9.1Supported Architectures: x64Website Home Page : www.numeca.comLanguage: englishSystem Requirements: PC / LinuxSupported Operating Systems: Windows 7even or newer / Fedora Core 22.x, 25.x, (K)Ubuntu 14.04, 16.04, CentOS 7.0.1406Size: 8.5 Gb本部分内容设定了隐藏，需要回复后才能看到
关于激活 0. Uninstall (if exist) previous SSQ's NUMECA License Server
To do it:
Run as Administrator "NUMECA_License_Server_11.14.0.2_x64\server_remove.bat"
Remove folder "NUMECA_License_Server_11.14.0.2_x64" from computer
1. Install NUMECA FineOpen 9.1 Win64. Do not reboot at the end of setup!
2. Copy folder "NUMECA_License_Server_11.14.0.2_x64" to NUMECA_SOFTWARE
root folder (by default to C:\NUMECA_SOFTWARE)
3. Run as Administrator "NUMECA_License_Server_11.14.0.2_x64\server_install.bat"
and wait until new services "NUMECA License Server" and "ISISCFDD License Server"
will be installed and started
4. Run "NUMECA_License_Server_11.14.0.2_x64\numeca_SSQ.reg" and confirm
to add info into Windows Registry
5. Run "NUMECA_License_Server_11.14.0.2_x64\SolidSQUADLoaderEnabler.reg" and confirm
to add info into Windows Registry
6. Replace original <fineopen81 program folder>
(by default C:\NUMECA_SOFTWARE\fineopen91 ) with cracked one
7. REBOOT computer!!
8. Enjoy
Cracked by TeAM SolidSQUAD-SSQ
微博帐号登录