AutoPIPE CONNECT Edition V2023 | 1.7 Gb
AutoPIPE为管道压力计算提供全面的软件工具。通过直观的建模环境和高级分析工具提高运营效率并改善质量控制。通过使 AutoPIPE 与关键工业设计应用程序兼容，在 CAD 工程师、设计师和设计师之间高效地共享信息。The Bentley development team is pleased to announce the availability of AutoPIPE CONNECT Edition 2023 (23.00.00.230) is design and analysis application for calculating piping code stresses, loads, and defl ections under static and dynamic load conditions to meet the highest nuclear standards. Bentley AutoPIPE 2023 Edition (v23.00.00.230:2023-03) What is New & Changed in AutoPIPE The following outline identifies new features and enhancements
Piping Codes
- Added support for ASME B31E 2008 (with 2010 addenda) - Seismic Design of Piping Systems. New stress categories required by ASME B31E are now added to the program for ASME B31.1, B31.3, B31.4 and B31.8 piping codes.
- Added ASME B31.4 2019 - Liquid Transportation Pipelines. This edition of B31.4 piping code now allows the use of ASME B31J stress intensification and flexibility factors.
- Added ASME B31.4 2019 Chapter IX Offshore Liquid Pipeline Systems. There are no major changes in this edition of the piping code.
- Added ASME B31.8 2018 - Gas Transmission Pipelines. This edition of B31.8 piping code introduces thick-walled hoop stress calculation formula when D/t is less than 30.
- Added ASME B31.8 2018 Chapter VIII Offshore Gas Transmission. There are no major changes in this edition of the piping code.
- Added ASME B31.8 2020 - Gas Transmission Pipelines. This edition of B31.8 piping code now allows the use of ASME B31J stress intensification and flexibility factors.
- Added ASME B31.8 2020 Chapter VIII Offshore Gas Transmission. The combined stress calculation equation has been updated in this edition.
- Added EN-13480-3 2017 + A4 2021 - Metallic Industrial Piping. Most of the stress equations have been revised and now explicitly mentions axial stress terms, use of SIF, and nominal vs corroded thickness usage. The material library is updated with the latest available properties from referenced standards.
- Added CSA Z662 2019 - Metallic Industrial Piping. There are no major changes in this edition of the piping code.
- Added CSA Z662 2019 Chapter 11 - Offshore Steel Pipelines. A Result Model Option is now provided to select between using Thick-walled formula vs standard hoop stress formula.
Modeling
- A feature to assist in the automatic soil discretization is now available. Program automatically inserts new points where soil transitions from one zone to another.
- Searchable node annotations can now be inserted on all of the visible piping geometry points.
Reports
- A new Flexible Joint report has been added that reports Axial/Lateral displacements and Torsional/Bending rotations of flexible joint for each non-code combination.
- Load Summary and Analysis Summary reports are now available for Microsoft Word reports.
General
- Updated program naming convention to align with Bentley's version naming and version support policy.
- Tag field has been added for Flexible Joints.
- Program now reverts to the last used folder on File Open.
- Incorporated ASME B31J general note 7. The program now provides warning to the user when the criteria for General Note 7 are not met.
- Model archive file now stores Stress Isometric setting files in the generated Archive if requested.
- Certified AutoPIPE for Windows 11 x64 operating system.
- AutoPIPE Nozzle is removed from the setup.
Interoperability
- AutoPIPE is now integrated with iTwin Synchronizer for Structure and Piping interoperability with other products like STAAD and SACS, including change management through iTwin Analytical Synchronizer.
- AutoPIPE now supports import of Caesar II version 12 neutral file.
Translators
- ME101 to AutoPIPE translator is now available in AutoPIPE.
Libraries
- Kinetics Noise Control spring hangers library is now available for hanger selection.
- Structural steel section libraries are now updated to the latest available. The file format for sections library is now SQLite.
Security Release Notes
- Updated Power Platform to version 10.17.2 that fixes security vulnerability CVE-2018-9466.
Bentley AutoPIPE is a stand-alone computer aided engineering (CAE) program for calculation of piping stresses, flange analysis, pipe support design, and equipment nozzle loading analysis under static and dynamic loading conditions. In addition to 24 piping codes, AutoPIPE incorporates ASME, British Standard, API, NEMA, ANSI, ASCE, AISC, UBC, and WRC guidelines and design limits to provide a comprehensive analysis of the entire system. AutoPIPE is available for Windows and can be licensed across networks. There are three versions of AutoPIPE: Standard, Advanced, and Nuclear. The Advanced version offers several advanced analysis capabilities not available in the Standard version which are detailed later in this chapter. The Nuclear version offers all of the features of the Advanced version with the addition of all the features for ASME class 1 design. A KHK2 Add-On option is also available for the Advanced or Nuclear version that allows use of the Japanese KHK Level 2 piping code in addition to all the features of the Advanced or Nuclear version. AutoPIPE is a proven, well established program which has been commercially available since 1986. AutoPIPE’s rigorous quality assurance practices have withstood numerous on-site audits, making AutoPIPE one of the few PC based piping programs approved for use in nuclear safety applications. This video will demonstrate the insert of the OpenPlant model (which can also be done with other 3D plant products) to run the initial pipe stress analysis in AutoPIPE. Then those pipe support results can be exported to STAAD.PRO via PipeLink. Bentley Systems, Incorporated. is the global leader dedicated to providing architects, engineers, constructors, and owner-operators with comprehensive architecture and engineering software solutions for sustaining infrastructure. Founded in 1984, Bentley has nearly 3,000 colleagues in more than 45 countries, $500 million in annual revenues, and, since 2001, has invested more than $1 billion in research, development, and acquisitions. Product: AutoPIPEVersion: CONNECT Edition 2023 (23.00.00.230)Supported Architectures: x64Website Home Page : www.bentley.comLanguages Supported: multilanguageSystem Requirements: Windows *Size: 2.9 Gb本部分内容设定了隐藏，需要回复后才能看到
关于激活 Dear all, you have AutoPIPE CONNECT Edition V12.01 with the connection and advisor client from the old release and the crack file from staad. You first install AutoPIPE CONNECT Edition V12.01 , then uninstall connection and advisr clients, clean registry with ccleaner, install the old connection and advisor files (Setup_CONNECTIONclientx64_10.00.13.017.exe and Setup_CONNECTAdvisorx64_10.01.00.130.exe), close connection client and run the staad.pro.cn.edition.x64.(cl).v22.00.00.15-patch.exe (use right admin) and you have a fully functional AutoPIPE CONNECT Edition V12.01 Thanks gogu252 tested by scutter. Enjoy in this release.
微博帐号登录