闪电联盟 - Powered by phpwind

离线pony8000

UID: 125

IT资讯组

发帖: 53402

今日发帖

最后登录: 2024-12-22

只看楼主倒序阅读使用道具楼主发表于: 2020-05-19 18:05:29

自助获取论坛邀请码

SACS CONNECT Edition V2023 | 1.6 Gb

Bentley 软件公司宣布对其最新版本 SACS CONNECT 版本 V2024进行增强，这是一款海上结构分析应用程序，可提供全自动和集成的 3D 建模、分析和设计，以有效管理大型、复杂的模型，以实现海上不断发展的数字化市场。

Bentley Systems announces enhancements to its latest release of SACS 2023 (23.00.02.094), an offshore structural analysis application that offers fully automated and integrated 3D modeling, analysis and design to efficiently manage large, complex models for the evolving digitalization in the offshore market.

SACS Marine Ultimate - Deprecated Motion/Stability Program
SACS Motion/Stability has been deprecated and replaced with SACS Motions and SACS Stability. These programs provide a more robust, full-featured solution for hydrostatic and hydrodynamic analyses with a full 3D graphical interface. SACS Motions and SACS Stability are based on the MAXSURF Motions and Stability programs.

23.00.02 List of Enhancements

Dynamic Response
1275837 - Optimized memory and disk use to improve performance.
Joint Can
1276378 - Added a joint can crushing option using superposition of internal ring stresses due to brace axial forces derived from Roark’s formulas for stress and strain.

Collapse Advanced
1269368 - Fixed an issue where loads defined past the end of the member would cause Collapse Advanced to crash. A warning message is now generated and the loads which extend past the end of the member are ignored.
1275827 - Fixed an issue where Collapse Advanced would not recognize plate elements without an assigned plate group.
Data Generator
1308965 - Added grouted option to JSLC line assistant in Datagen for Joint Can analyses.
Fatigue
1228695 - Fixed an issue where Fatigue analyses could crash when a plate panel code check option was selected.
Joint Mesher
1307914 - Fixed an issue with nominal load transformation in SACS Joint Mesher for SCF extrapolation. Also fixed an issue with Joint Mesher failing to mesh shell elements.
1310524 - Fixed an issue with reported stresses for SCF Extrapolation with shell elements and Metric units. Also fixed some minor formatting errors in the SCF Extrapolation report.
Post
1259101 - Fixed an issue with Canadian CSA-16 code check where a different design code check might be performed.
Precede
1247191 - Fixed an issue with the Load by Volume tool where some elements are not correctly cut below the minimum Z level.
SACS Executive
1299936 - Fixed an issue where SACS Offshore Structure Advanced was not used for some Seastate analyses.
1314147 - Fixed an issue where the OpenWindPower - Fixed Foundation license required Offshore Select Entitlements.
Seastate
1234914 - Fixed an issue where Seastate would not write base shear and overturning moment plots for static transfer function cases.
1297096 - Improved Seastate load summation reporting to determine force couples from the relative magnitude of the load about the global axis instead of the total magnitude of the load. This will reduce the number of reported force couples.
Utilities
1292650 - Fixed an issue where Rigid would crash if the number of joints exceeded 9999. The upper limit for joints has been increased to 100000.
iTwin Analytical Synchronizer 23.01.02 - Release Date: 13th November 2023

Maintenance Patch
This update is primarily a robustness and stability release.
API Supports
As with general practice, API releases are supported for at least three years. Currently ISM API 8, 8.1, and 9.1 are supported.

SACS is an integrated finite element structural analysis package of applications that uniquely provides for the design of offshore structures, including oil and gas platforms, wind farms, and topsides of FPSOs and floating platforms. SACS software has been used by offshore engineers around the world for nearly 40 years. Many of the world’s energy companies specify SACS software for use by their engineering firms across the lifecycle of offshore platforms. Three options of the SACS software packages are available: Offshore Structure Enterprise for comprehensive capabilities required for typical offshore jackets, wharfs, and dolphin structures; Offshore Structure Advanced for static topside and deck analysis; and Offshore Structure for static structural analysis

SACS Offshore Structure Product Overview

Bentley Systems, Incorporated is the global leader dedicated to providing architects, engineers, constructors, and owner-operators with comprehensive architecture and engineering software solutions for sustaining infrastructure. Founded in 1984, Bentley has nearly 3,000 colleagues in more than 45 countries, $500 million in annual revenues, and, since 2001, has invested more than $1 billion in research, development, and acquisitions.

Owner: Bentley Systems, Inc.
Product Name: SACS
Version: 2024
Supported Architectures: x64
Website Home Page : www.bentley.com
Languages Supported: english
System Requirements: Windows **
Size: 2.5 Gb

* System Requirements:

Minimum System Requirements

SACS CONNECT Edition (v14.0) has the following minimum system requirements:

- Pentium 4 or higher central processing unit (CPU).
- 512 megabytes (Mb) of RAM minimum. SACS performance is dependent on the size of the SACS model and the amount of available system resources; see SACS System PC Recommendations below.
- Microsoft Windows 7
- Microsoft Windows 8/8.1
- Microsoft Windows 10
- Internet Explorer 6 or later
- Windows Media Player (for analysis sound file support)
- A hard disk partition with 800 Mb of free space is required for the SACS installation.
- A video card with a chipset that supports OpenGL. A reference list may be found at Supported Graphics Cards
- CD-ROM or DVD-ROM drive.
- Network Server and Network Client Installations - The Local Area Ethernet Network should be 100 Base-T or greater. TCP/IP network protocol is supported.

SACS System PC Recommendations

SACS CONNECT Edition (v14.0) will run satisfactorily with most basic new PC configurations for both laptops and desktop PCs. For minimal configuration PCs or older PCs, the most notable degradation in performance will be in 3D rendering applications (Precede) and when model size exceeds 1000 joints. For model sizes greater than 1000 joints it is recommended that additional memory and storage be added as stated below. The following recommendations are for optimal SACS performance.

- RAM - 1024 megabytes (Mb) of free (1) RAM minimum, 4096 Mb or more is preferred. SACS will utilize all available RAM. SACS performance is dependent on the size of the SACS model and the amount of available system resources.
(1) Free RAM refers to available RAM after all operating system processes have been loaded.
- CPU - A multi-core CPU is recommended although not required.
- Operating System - Windows 7 Professional or later.
Note: All x86 versions of Windows cannot utilize more than 3200 Mb of RAM. The x64 version of Windows should be considered to take advantage of additional memory as well as future SACS upgrades.
- Hard Disk - 800 Mb of free space is required for the SACS installation. A SATA RAID 0 hard disk is recommended for optimal analysis performance.
Note: After the SACS installation is complete the free space used for executions should not fall below 50% of the total drive capacity. Total free space for execution should be at least 1 gigabyte for small models solutions. Very large model solution could require 400 gigabytes or more.
- Video Card - A video card that supports OpenGL or DirectX9 is required for all 3D rendering SACS products. It is very important to make sure that the graphics drivers on your computer are up to date for maximum performance and correct operation.

本部分内容设定了隐藏，需要回复后才能看到