Siemens NX 1892.4101 (1872 Series) | 13.1 Gb
Languages: English, 中文, Čeština, Español, Français, Deutsch, Italiano,
日本語, 한국어, Polski, Português, Русский
The Siemens Digital Industries Software development team is pleased to announce the availability of NX 1892.4101 (1872 Series). This continuous release is robust and powerful, and it delivers advanced technologies for product design, development, and manufacturing in a single, multidisciplinary platform. Siemens NX 1892.4101 (1872 Series) Release Notes - Date: July 2020
1892.4101 ENHANCEMENTS
Please see below for a list of enhancements included in this release:
ER:
- ER 9055084 ER: Adding attributes to Built Up components
- ER 9465810 Marking Line Feature to be able to select specific bodies for marking
- ER 9469121 ER: possibility to control view label size on site level
- ER 9486290 ER: Default view direction of longitudinal bulkheads in section drawing feature
- ER 9559994 PMI section views cannot clip routing objects
- ER 9583505 Detect spools fails on discontinuous runs
- ER 9765729 ER: Profile Sketch report of processed profile
- ER 9783794 ER: create stiffener - keep selected option
- ER 9783823 ER: Plate Feature - keep selected for mold face
- ER 9783870 ER: Edge Cuts shift position with small cut
- ER 9794152 Frame bar on sloped views seem to be incorrect
Fixed Problem Reports 1892.4101
1892.4101,8440851,NX 1003 MP18 -> NX 1892 Part modified
1892.4101,8864632,"Section Drawing not giving correct result, Additional Structure is missing."
1892.4101,9055084,ER: Adding attributes to Built Up components
1892.4101,9465810,Marking Line Feature to be able to select specific bodies for marking
1892.4101,9469121,ER: possibility to control view label size on site level
1892.4101,9486290,ER: Default view direction of longitudinal bulkheads in section drawing feature
1892.4101,9559994,PMI section views cannot clip routing objects
1892.4101,9583496,Spool delimiters are not visibly highlighted for Designate Delimiters
1892.4101,9583505,Detect spools fails on discontinuous runs,ROUTING_GENERAL
1892.4101,9583513,Remove Spool on Pipe Run must be performed twice to succeed
1892.4101,9618838,Align view is very slow in structure drafting
1892.4101,9622649,Section drawing to support sloped plates
1892.4101,9657696,Slow Save performance for assembly in TCIN.
1892.4101,9662827,Find Feature Process failed / Message: Missing Target Body
1892.4101,9712732,[27417] Assembly loading performance large ship structure assemblies
1892.4101,9712734,[27417] Performance creating Manufacturing parts
1892.4101,9712736,[274174] saving performance (SHIP) manufacturing assembly
1892.4101,9712742,[27417] open Manufacturing Preparation Feature performance
1892.4101,9712744,[27417] Restructure Manufacturing assembly structure save
1892.4101,9714575,Automatically Set Machining Data in Operation - it does not work
1892.4101,9729176,Manufacturing XML output is not processing all parts
1892.4101,9744616,Cope corner giving wrong results if pipe branch is short
1892.4101,9753948,LOV is not populated in the NXManager creation dialog
1892.4101,9762102,Mold Wizard: Unable to deselect Limits faces in Adjust Channel dialog after…
1892.4101,9765729,ER: Profile Sketch report of processed profile
1892.4101,9768331,Mold Wizard Initialize Project fails to add second project in managed NX/TC
1892.4101,9778345,Unnecessary long update times
1892.4101,9778467,Edit Ship Section View method resulting in undesired results
1892.4101,9778581,Poor performance of ship annotation tool on large drawings
1892.4101,9780703,Remove Spool not possible-SPOOL ID attribute is locked after modifying the spool
1892.4101,9782201,Not able to change view lock method to none
1892.4101,9782957,"Empty parts after import STEP with ""export assembly as external references"""
1892.4101,9783794,ER: create stiffener - keep selected option
1892.4101,9783823,ER: Plate Feature - keep selected for mold face
1892.4101,9783870,ER: Edge Cuts shift position with small cut
1892.4101,9784725,Registration file error: Null pointer encountered
1892.4101,9787238,Annotate Ship Drawing View - Incorrect object for this operation
1892.4101,9788329,Detect spools crashed NX on loop run
1892.4101,9792556,Specified Stock will only list from 1 PTB file.
1892.4101,9807215,Standard Part Bracket U4 not working if update is delayed
1892.4101,9809290,Create collar plates based on frozen links causes null tag error
1892.4101,8442844,Error when using NXOpen.Annotations.DraftingImage.ExportFile()
Siemens NX 1892.3800 (1872 Series) Release Notes - Date: May 2020 1892.3800 ENHANCEMENTS Please see below for a list of enhancements included in this release:ER:- ER 9720650 – Profile sketches to support multiple TCLs- ER 9721102 – Automatically place inverse bending line on profile sketch- ER 9729404 – Adding detail design part attribute which describes the position (SB, PS, CL)- ER 9730225 – Planar Stiffener receives attribute value non-planar (on curved deck) Routing PLMXML Export/Import - Version 1, April 5, 2019We have added the capabilities to explicitly export/import Routing electrical connector/connection data to/from various datasets under an Item Revision in Teamcenter. The dataset type, the dataset relation, and named reference type are all configurable via the Routing electrical preferences in the appview file. In previous versions of NX, it was only possible to export Routing electrical connector/connection data to a dataset named “Routing Electrical Data” under an Item Revision as it was being saved. Also, it was only possible to import the Routing electrical connection/connection data from this pre-defined dataset named if it had been saved with the Item Revision. Fixed Problem Reports 1892.3800 1892.38,8442844,Error when using NXOpen.Annotations.DraftingImage.ExportFile() ,DRAFTING,ANNOTATION,RASTER_IMAGE
1892.38,8442883,Error when using NXOpen.Annotations.DraftingImage.GetFileType() ,DRAFTING,ANNOTATION,RASTER_IMAGE
1892.38,9579381,Error in tcin_import for many drawings ,NXMANAGER,CLONE_IMPORT,IMPORT_ASSEMBLY
1892.38,9588682,Fatal Error with import about tcin_import ,NXMANAGER,CLONE_IMPORT,IMPORT_ASSEMBLY
1892.38,9656660,Quickpick selection mulfunction ,CAE,ADV_SIMULATION,SMART_SELECTION
1892.38,9669299,Supplier Collaboration pkg send remain incomplete dueto SSO Authentication Issue,SUPL_COLLAB,TC_SUPL_COLLAB,DES_DATA_EXCH
1892.38,9680700,Workset will not load to NX ,PMI,SECTION_VIEW,OTHER
1892.38,9701521,NX fail to name UGPart when Multifield Key is changed ,NXMANAGER,FILE_SAVE_AS,REVISE
1892.38,9702849,NX crashes when using NXOpen.UF.UFDrf.AskImageData() ,DRAFTING,ANNOTATION,RASTER_IMAGE
1892.38,9717121,NX fail to name UGPart when Multifiled Key is changed ,NXMANAGER,FILE_SAVE_AS,REVISE
1892.38,9717791,NXMGR: File Open dialog box wont show folder name ,NXMANAGER,FILE_OPEN,UI
1892.38,9719715,NXManager gives error Working revisions limit exceeded… importing part ,NXMANAGER,CLONE_IMPORT,IMPORT_ASSEMBLY
1892.38,9720650,ER: Profile sketches to support multiple TCLs ,DRAFTING,SHIPBUILDING,ANNOTATION
1892.38,9721102,ER: Automatically place inverse bending line on profile sketch ,DRAFTING,SHIPBUILDING,ANNOTATION
1892.38,9724963, Mold Wizard Collision Clearance value behavior in Run Simulation ,KDA,MOLDWIZARD,OTHER
1892.38,9728294,[27733] Automatically add plate bending template body to model reference set ,SHIP_DESIGN,MANUFACTURING,PLATE_PREP
1892.38,9729404,ER:Adding detail design part attribute which describes the position (SB PS CL),SHIP_DESIGN,STEEL_FEATURES,NAMING_RULE
1892.38,9730225,ER: Planar Stiffener receives attribute value non-planar (on curved deck) ,SHIP_DESIGN,STEEL_FEATURES,STIFFENER
Siemens become the first major CAD/CAM/CAE vendor to deliver its software using Continuous Release methodology in January 2019. With this deployment model, NX customers will be able to access new improvements more quickly while reducing the effort required to implement NX. This makes Siemens the first major CAD / CAM / CAE software provider to publish product updates in this way and provides innovations and improvements in the software even faster. The main change for you as a customer are the monthly update releases, which are made available to you within a single release series. Bugs are therefore no longer fixed in different releases, just in the latest update and even smaller extensions are integrated promptly, which raises the quality to a new level. Significant enhancements that may affect the schema and compatibility are expected approximately every six months. Whether and when you roll out updates in your company, if you automate the updates or if you want to use different versions on the same hardware remains your decision. NX CAM engineer Aaron Blake covered what's new in NX CAM continuous release 1872, with a focus on changes in Fundamentals, Milling, Integrated Simulation and Verification (ISV), Postprocessing, and Feature-based Machining. Toward the end, Aaron also covers some of his core CAM tips & tricks. Siemens Digital Industries is an innovation and technology leader in industrial automation and digitalization. In close cooperation with our partners and customers, we are the driving force for the digital transformation in the discrete and process industries. Product: Siemens NXVersion: 1892.4101 (1872 Series) *Supported Architectures: x64Website Home Page : www.plm.automation.siemens.comLanguage: multilanguageSystem Requirements: PC **Supported Operating Systems: **Size: 12.9 Gb * Files save in the NX-1872 Series (NX-1872-1892.xxxx) cannot be opened in the NX-1847 Series (NX 1847-1867.xxxx) and lower versions of the NX ** System Requirements: Minimum Operating Systems
- Microsoft Windows 10 (64-bit) Pro and Enterprise editions
Windows 10
Windows 10 is the minimum supported release for NX 1867. The supported versions of Windows 10 are the Professional and Enterprise editions utilizing either the Current Branch for Business (CBB) or Long Term Service Branch (LTSB) update branch. The Current Branch (CB) update option is not supported. Windows 10 is also available for NX 10.0.3 and later versions including NX 1867. Any caveats or special instructions are provided in the SFB announcing support.
Windows 7 and 8.1
Windows 7 has reached the end of life and mainstream support has ended. Windows 8.1 is still supported by Microsoft, but was rarely deployed. These two versions of Windows are no longer supported by NX 1867. Siemens PLM Software has not performed testing on these versions and cannot resolve any issues related to NX 1867 running on these operating systems.
Windows XP and Vista
Windows XP support from Microsoft has ended and Vista was rarely deployed so these two versions of Windows are not supported by NX 1867. Siemens PLM Software has not performed testing on these versions and cannot resolve any issues related to NX 1867 running on these operating systems.
Recommended System Configuration:
- 64-bit Windows 10 operating system
- 4 GB RAM minimum, 8 GB or 16 GB RAM recommended
- True Color (32-bit) or 16 million colors (24-bit)
- Screen Resolution: 1280 x 1024 or higher, widescreen format
本部分内容设定了隐藏，需要回复后才能看到
微博帐号登录