[行业软件]Hexagon MSC Easy5 2023.1 破解版 [复制链接]

MSC Software, part of Hexagon’s Manufacturing Intelligence division has released Easy5 2023.1 is a graphics-based software tool used to model, simulate, and design multi-domain dynamic systems characterized by differential, difference, and algebraic equations.

Release 2023.1 Features

Gas Dynamics Library Useability Improvements
For new instances of most non-obsolete components:
- The local dimension "# of gas species" has been replaced by a global dimension parameter.
- The local configuration parameter "Formulation", with the choices of "Explicit" and "Implicit", has been replaced by a global configuration parameter.
This will allow you to set these parameters for all the GD library components in your model in one operation, instead of having to set these component-by-component. To set these parameters for an entire model, select Options > Set Model Global Configuration. To set these parameters for a submodel, right-click on the submodel icon and select Set Submodel Global Configurations.
These global configurations were not implemented in the following components:
- HK (gas-gas heat exchanger based on effectiveness map): This component has two "# of gas species", one for each stream. Since there is only one global dimension parameter for this, the global "# of gas species" was not implemented.
- NO (Node or Volume): Because of library component limitations the new configurations could not be implemented, so NO is now obsolete. Use the new component CH instead, it is identical to NO in every respect except that it uses global configurations instead of local configurations.
- CS (Cabin Thermal Model): Because of library component limitations the new configurations could not be implemented, so CS is now obsolete. Use the new component CA instead, it is identical to CS in every respect except that it uses global configurations instead of local configurations.
Linear Model
- Component GP/SM can now approximate either continuous or hybrid/discrete models. Previously it only modeled continuous linear approximations.
- Linear Model Generation: when Save System Matrices is Yes and a System Matrices Name is specified, then the system matrices are saved into two different files:
. <ModelName>.<System Matrices Name>.ezlmf. This is previously existing capability, the .ezlmf file is in the auxiliary input format for component SM. For continuous systems only.
. <ModelName>.<System Matrices Name>.json. This is the new capability. The .json file can be read into the component data tables of components SM, XV, YU and YV by selecting Options > Load json model data.

Hexagon's MSC Software CAE simulation solutions enable engineers to validate and optimise product designs using virtual prototypes. Customers in almost every part of manufacturing use our software to complement, and in some cases even replace, the physical prototype "build and test" process that has traditionally been used in product design.
Easy5 was developed and designed by engineers to efficiently solve real-world, industrial problems and simplifies the construction and analysis of such systems with a graphical, schematic-based application. A comprehensive set of pre-packaged components, stored in application-specific libraries, simplify the assembly of a representative model and facilitate quick and accurate system simulation. Engineers work within a familiar schematic drawing paradigm to add and specify data connections between components in an intuitive, simple-to-use, multi-level hierarchical modeling environment. For over forty years, through continuous improvement, Easy5 has remained the simulation tool of choice for many complex and difficult systems.

动态系统（其行为随时间变化很重要的系统）通常使用一阶微分或差分方程式定义。 Easy5通过基于原理图的图形化应用程序简化了此类系统的构建和分析。一组完整的预包装组件存储在特定于应用程序的库中，简化了代表性模型的组装，并有助于快速而准确的系统仿真。工程师在一个熟悉的原理图范例中工作，以在直观，易于使用的多层分层建模环境中添加和指定组件之间的数据连接。


Easy5由工程师开发和设计，可有效解决现实世界中的工业问题。四十多年来，通过不断的改进，Easy5一直是许多复杂而困难的系统的首选仿真工具。


能力：
热工液压系统：致动系统，动力换挡变速箱系统，防抱死制动系统，起落架，燃油喷射系统，主动悬架系统，润滑系统
气体动力学：气动，推进，灭菌，空气和蒸汽循环，高压气体，气体传输，吸附，气相反应，HVAC，ECS，多种气体系统
多相流体：制冷，空调，气候控制，低温管道网络，蒸汽/水系统或带有稀有挥发性流体的燃料系统
系统控制硬件和软件评估（数据采集采样率，异步通信，模拟和数字电子滤波器，控制回路执行率，网络（CAN）总线通信等）
电气系统：AC / DC机器，电力电子设备，电池等
针对飞行动力学和许多其他物理系统的详细而准确的工厂建模
Owner: MSC Software
Product Name: Easy5
Version: 2023.1
Supported Architectures: x64
Website Home Page : https://hexagon.com/
Languages Supported: english
System Requirements: Windows *
Size: 1.2 Gb

MSC Easy5 2020 破解版

非常感谢分享

感谢分享MSC Easy5 2020 破解版

感谢分享。。。。。。

感谢分享！

Hexagon MSC Easy5 2023.1

666666666666

这都有，太好了

许可是否是过期了，有没有人用过哈？