论坛风格切换
 
  • 帖子
  • 日志
  • 用户
  • 版块
  • 群组
帖子
购买邀请后未收到邀请联系sdbeta@qq.com
  • 7412阅读
  • 11回复

[行业软件]MAGNA KULI 16.1激活 [复制链接]

上一主题 下一主题
离线pony8000
 

发帖
53402
今日发帖
最后登录
2024-12-22
只看楼主 倒序阅读 使用道具 楼主  发表于: 2020-08-23 18:49:44

MAGNA KULI 16.1 | 323.1 mb

Engineering Center Steyr (ECS), a company belonging to the Magna Steyr group, is pleased to announce the availability of KULI software version 16.1 is a software the main goal isenergy management optimization. It can simulate vehicle cooling systems andallows to calculate components temperature, heat losses, power losses, etc.
Engineering Center Steyr (ECS), a company belonging to the Magna Steyr group, is pleased to announce the availability of KULI software version 16.1 is a software the main goal isenergy management optimization. It can simulate vehicle cooling systems andallows to calculate components temperature, heat losses, power losses, etc.
Release Notes KULI 16.1

Improvements

KULI base
- Fix - CCFC: Opening of component file caused a crash in case of using a media in the specification, which was not available in the media path. This is fixed now.
- Fix - Error check: When the simulation of a cooling system was started and the cooling system contained changes that had not been saved previously, the Error check had been performed twice instead of once. This is fixed now.
KULI advanced
- Fix - Resistance Matrix: When creating a resistance matrix some unit inconsistencies during initialization could result in slightly incorrect correction factors. This is fixed since KULI 16.
KULI hvac
- Fix - Expansion device: Pressing the calculation button in the calculation table of an empty expansion device component window lead to a KULI crash. This is fixed now.
- Fix - ACPHE: If in a transient calculation an ACPHE component is within a locked branch which is unlocked at a later timestep, the mass flow of the component remains zero, leading to a wrong system behaviour. This is fixed now.
- Fix - AC simulation: In KULI 16 canceling an A/C simulation was possible at the end of a timestep or operating point only. Now the calculation can be canceled during the calculation as well.

Magna's KULI software has long been used to simulate and optimize the thermal management system for automotive applications.

For thermal management systems safety means that all vehicle components (combustion engine, e-drive, battery…) can operate within their designated temperature ranges for all relevant vehicle operating points, driving cycles and ambient conditions. Efficiency means that this task is achieved with minimized energy effort. Adding passenger comfort as an important factor and also focusing on system cost minimization step by step reveals the complexity of modern cooling- and HVAC-system design.

This is a task, which can only be handled by comprehensive system level simulation… and KULI is a software tool which has been developed to do exactly that.

Based on a solid foundation of 25 years of vehicle thermal management for internal combustion engine powertrains, KULI also offers the best possible support for all related e-mobility topics. Built around a battery pack thermal simulation environment which has set the benchmark for both ease of use and flexibility, KULI eco also offers simulation models for motors and power electronics. A full set of features for the simulation of air conditioning and heating systems completes what truly can be called the most advanced and comfortable thermal simulation tool for electric vehicles on the market.

Magna's flexible powertrain architecture provides flexible options for automakers and helps reduce emissions without sacrificing performance.

The Engineering CENTER STEYR (ECS) is the „center of excellence‟ for world class automotive engineering services within Magna Powertrain, group of Magna International, the most diversified automotive supplier around the world.

ECS, located in St. Valentin / Austria, provides a high range of services for manufacturer of passenger cars and commercial vehicles in Europe, Asia and America. Software products, developed by ECS, like FEMFAT (fatigue life prediction) and KULI (complete vehicle energy & thermal management), have been used by all major OEM‟s for many years.

Product: MAGNA KULI software
Version: 15.0
Supported Architectures: x64
Website Home Page : www.kuli.magna.com
Language: english
System Requirements: PC *
Size: 323.1 mb


本部分内容设定了隐藏,需要回复后才能看到





软件下载咨询邮箱: sdbeta@qq.com (回复及时)
 
精品软件:百度搜闪电软件园  最新软件百度搜:闪电下载吧
有问题联系 sdbeta@qq.com
离线mypwjcy

发帖
376
今日发帖
最后登录
2020-11-24
只看该作者 沙发  发表于: 2020-08-24 00:03:20
谢谢楼主提供!!

发帖
1650
今日发帖
最后登录
2024-12-22
只看该作者 板凳  发表于: 2020-08-24 08:51:32
真是好东西,下载了,感谢楼主。       
离线dgd2019

发帖
8383
今日发帖
最后登录
2024-12-21
只看该作者 地板  发表于: 2020-08-25 07:47:56
谢谢楼主提供!!
离线huanghaozhe

发帖
24
今日发帖
最后登录
2024-07-04
只看该作者 地下室  发表于: 2021-04-19 21:59:54
谢谢楼主!
离线tiger1986

发帖
3
今日发帖
最后登录
2021-12-05
只看该作者 5 发表于: 2021-12-02 22:15:36
链接  在哪里?
软件下载咨询邮箱: sdbeta@qq.com (回复及时)
 
离线dgd2019

发帖
8383
今日发帖
最后登录
2024-12-21
只看该作者 6 发表于: 2022-09-15 06:51:59
支持楼主的分享。       
离线dgd2019

发帖
8383
今日发帖
最后登录
2024-12-21
只看该作者 7 发表于: 2022-09-18 19:06:39
        
离线理想之城

发帖
17
今日发帖
最后登录
2024-10-26
只看该作者 8 发表于: 2023-08-25 21:12:41
谢谢分享,学习一下~!!
离线cjycsu

发帖
14
今日发帖
最后登录
2024-10-21
只看该作者 9 发表于: 2024-03-01 21:11:57
感谢楼主分享,正需要这个软件