- 发帖
- 53392
- 今日发帖
- 最后登录
- 2024-11-24
|
该实用程序用于在基于AutoCAD的垂直解决方案(例如Civil 3D)中设计执行方案。 Verticality of structures Geo_dev_verticalThe application creates arrows in the drawing with signatures of deviations from the project.As the actual position, you can use:As a project position, you can use:-< Tolerances >-The application controls the deviation from the project on 3 parameters:- in the lower section,
- in the upper section,
- Verticality.
-< Color >-You can select colors to display the corresponding values.- < Sign > -You can sign above the arrow one of:- Deviation from the project in the upper section,
- Deviation from verticality relative to the lower part
You can sign below the arrow one of:- Deviation from the project in the lower section,
- Do not display anything
The value of the prefixes in the box can also be set, but:- It is not recommended to use more than one character,
- If there is no prefix the square will not be drawn.
-< Layer >-You can assign a layer from existing ones in the drawing or create a new one for created objects.-< Text >-You can choose the text style for the signature of deviations.All blocks are created with the height of attributes equal to 1. When inserted into the drawing, they are given the appropriate scale, so that the height of the attribute corresponds to the annotation you entered in the dialog at the current annotation scale.In this case, the blocks are annotative and their size will change when you change the annotation scale.- < Coefficient > -It is for converting the measured values from the drawing units to the ones you need.Geo_dev_vertical_selSince the application creates a large number of different blocks, it is convenient to use this command for their mass selection.You can specify the block pattern upon the first request. The second request is selecting of the required area in the drawing.Geo_dev_vertical_sel_badThe application is similar to the previous one. There is only one difference that in this case only blocks, that contain deviation values large, than the allowed values, will be selected.Geo_dev_vertical_move_blockThe block is reversed relative to the insertion point at short distances by the application. The block is moved and the callout from the starting point of the insert is built at long distances by the application.Dimensions Geo_dev_dist_kons_to_pointThe application creates a dimension from the point along the perpendicular to the design. All objects are created in accordance with the current settings layer/color/style/...As the actual position, you can use:As a project, you can use:- 2D/3D polyline,
- Spline,
- Line.
Geo_dev_dist_ax-co-ptThe application creates dimensions that contain 2 values: the first one is project value (from axis to construction) and the second one is actual value (from axis to point).As the actual position, you can use:As a project, you can use:As an axis, you can use:- < Composition > -You can choose the location of the actual and project value in the numerator or in the denominator. You can also specify prefixes/suffixes for these values.-< Color >-You can select colors to display the corresponding values.-< Options >-You can choose the dimensional style and tolerance.-< Layer >-You can assign a layer from existing ones in the drawing or create a new one for created dimensions.Geo_dev_2dist_ax-co-ptThe application is similar to Geo_dev_dist_ax-co-pt, with only one difference being that 2 dimension are supplied from one corner of the structure to 2 perpendicular axes, containing the project and actual values.Geo_dev_dist_ax-co-pt_curvThe application is similar to Geo_dev_dist_ax-co-pt, with only one difference being that the axis and project can be curved lines, such as Spline or Civil’s tracesGeo_dev_dist_+_factThe application adds to the already existing dimensions the actual distance calculated by the points found near the base points of the dimension. In this case, at least one point of the actual point is sufficient.You can specify the tolerance upon the first request. The second request is the sample point. The third one is the sample dimension. The fourth one is the desired area in the drawing. Geo_dev_dist_sel_badThe application allows you to select dimensions that contain values that are large, than the allowed values.You can specify the sample dimension upon the first request. The second request is selecting of the desired area in the drawing. Deviations of point objects Geo_dev_point_from_pointThe application creates arrows with signatures of deviations from the project in the plan, as well as the callouts with the value of the deviation from the altitude.As the actual position, you can use:As a project position, you can use:- Block,
- Point,
- CoGo point,
- Circle.
-< Tolerances >-You can enter the value of the tolerances and choose which parameters we will calculate and sign.-< Text >-You can choose the text style for the signature of deviations.All blocks are created with the height of attributes equal to 1. When inserted into the drawing, they are given the appropriate scale, so that the height of the attribute corresponds to the annotation you entered in the dialog at the current annotation scale.In this case, the blocks are annotative and their size will change when you change the annotation scale.- < Project altitude > -A design altitude can be taken from an object, or you can specify a fixed value. - < Coefficient > -It is for converting the measured values from the drawing units to the ones you need.-< Layer >-You can assign a layer from existing ones in the drawing or create a new one for created objects.Geo_dev_point_from_lineThe application is similar to Geo_dev_point_from_point, with only one difference being that the project position acts as linear objects instead of point ones:- 2D/3D polyline,
- Spline,
- Line.
And also you can choose which side of the line is acceptable to set the deviation. Civil 3D2021下载: http://bbs.sdbeta.com/read-htm-tid-574439.html [ 此帖被pony8000在2020-09-17 20:02重新编辑 ]
|