Siemens Star CCM+ 2021.3.0 R8 Linux | 3.7 Gb
The Siemens Digital Industries Software development team is pleased to announce the availability of Simcenter STAR-CCM+ 2021.3.0. This release introduces a host of new features to help you design better products, faster and with greater confidence. Simcenter STAR-CCM+ 2021.3 released! What’s new ? Increased insight into turbomachine performance3D analysis of a turbomachine offers deep insight into local flow features to assess its performance. With Average Solution Visualization, you can now circumferentially average the flow solution to better visualize macroscopic features such as hub or shroud separation so that you can readily identify issues in the flow path and ensure the intended performance is achieved.Another important data analysis tool for better engineering decisions across blade designs is the blade-to-blade view. With Section Flattening, you can now project a complex 3D blade-to-blade solution to a flattened 2D view. This helps you to understand performance, visualize flow behavior and ensures consistent comparisons between designs. A faster approach to characterizing compressor performanceWhen characterizing compressor performance, it was often necessary to change the outlet boundary condition type when the operating point moves from choke to surge. The Corrected Mass Flow Outlet BC is a single boundary condition that can now be used to accurately predict all points along the compressor speedline, saving time and resulting in a more uniform resolution of points. Open simulation files without a license for increased productivityDesign engineers need to ensure consistency in their simulation set-up across operating points and design variants. In this release, you can open simulation files in read-only mode without consuming a license, giving you much greater ability to check your set-up, make comparisons and leverage your best practices across many simulations. Quickly predict performance of thousands of design variantsTolerances can make or break manufacturing processes and need to be considered early in the design process. With Surrogate Models in Design Manager, you can predict the performance of thousands of variants either locally around your design of interest to analyze probability of failure or globally across the design space to quickly create a database of performance results that can be leveraged by your simulation team. Reduce setup time for electromagnetic simulationsElectromagnetic simulations require the specification of an electric circuit which can be time consuming. With the new Electric Circuit Editor, you can readily sketch sophisticated circuits with an easy-to-use and intuitive graphical interface, enhancing usability of the Circuit Model and saving time. This tool is beneficial for all applications with circuits including electric machines, circuit breakers and batteries. Design higher power density electric machinesIn this release, we continue to expand the application coverage for electric machines with the introduction of a new vector method to specify the current direction when using the Finite Element Excitation Coil Model. This approach does not require the presence of any boundary, greatly improving the usability of the Excitation Coil Model and enabling the simulation of closed coils such as those found in axial flux machines. Simcenter STAR-CCM+ is a complete multiphysics solution for the simulation of products and designs operating under real-world conditions. Uniquely, Simcenter STAR-CCM+ brings automated design exploration and optimization to the simulation toolkit of every engineer, allowing you to efficiently explore the entire design space instead of focusing on single point design scenarios. Simcenter STAR-CCM+ 2021.1 introduces a host of new multiphysics CFD simulation features to help you design better products faster and with greater confidence. 2021.1 includes new capabilities in turbomachinery and electromagnetics simulation, surrogate models for design The additional insight gained by using Simcenter STAR-CCM+ to guide your design process ultimately leads to more innovative products that exceed customer expectations. What’s new Simcenter STAR-CCM+ 2021.1 Siemens PLM Software a business unit of the Siemens Digital Factory Division, is a leading global provider of software solutions to drive the digital transformation of industry, creating new opportunities for manufacturers to realize innovation. With headquarters in Plano, Texas, and over 140,000 customers worldwide, Siemens PLM Software works with companies of all sizes to transform the way ideas come to life, the way products are realized, and the way products and assets in operation are used and understood. Product: Siemens Simcenter Star CCM+Version: 2021.1.0 R8 Build 16.02.008-R8Supported Architectures: x64Website Home Page : http://mdx.plm.automation.siemens.com/Language: multilanguageSystem Requirements: Linux *Size: 3.7 Gb * System Requirements: Changes to Deployment
* Newly certified operating systems (OS)
- CentOS 7.8, SUSE Linux Enterprise Server (SLES) 12
*Newly supported operating systems (OS)
- RHEL 7.8
* Planned operating systems (OS) changes for 2021.2
- Adding RHEL 8.2, SLES 15.2, OpenSUSE Leap 15.02, Windows 10 May 2020 Update
- Retiring CentOS 7.4
* Advance warning: CentOS 8.x to be retired for 2021.3
- This is as a result of the accelerated end of life announcement from the CentOS project with CentOS 8 ending on the 31st of December 2021
* Newly certified Message Passing Interface (MPI) versions
- Linux: Intel MPI 2019.8
* Retired Message Passing Interface (MPI) versions
- Linux: Intel MPI 2019.7
- Advance warning: Platform MPI will no longer be distributed with Simcenter STAR-CCM+ starting in 2021.3
These are the recommended hardware requirements to run Simcenter STAR-CCM+ and the CAD Clients. You can improve performance by using better specifications than those listed. - Processor: 2.4 GHz CPU with at least 4 cores per CPU (to allow client and server to work in separate spaces and to run in parallel)
- Memory: 4 GB of memory per core.
- Disk Space: 9 GB of free disk space (more space is required to save simulations).
- Graphics Card: Dedicated graphics hardware that has 3D capability, z-buffer and translucency. Minimum screen resolution of 1024x768 pixels is recommended.
购买后，将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容，购买后显示
微博帐号登录