14588阅读
19回复

[行业软件]Trimble Tekla Structures 2021 SP12 (x64) [复制链接]

上一主题下一主题查看指定楼层

离线pony8000

UID: 125

IT资讯组

发帖: 53388

今日发帖

最后登录: 2024-11-06

只看楼主倒序阅读使用道具楼主发表于: 2021-04-06 20:42:16

自助获取论坛邀请码

Tekla Structures 2021 SP12 (x64) Multilingual | 3.45 Gb

At Tekla, innovation isn’t just a software update, or a new product or tool. It’s a mindset. A way of thinking. A willingness to question and challenge perception. It’s an enduring drive to find new ways to make the construction workflow, work better. The Tekla 2021 software releases are all about that mindset. With new features and enhancements to drive data-driven and connected workflows, you’ll experience faster modeling, simplified change management, enhanced usability and increased interoperability. We’ve also taken the best structural BIM software on the market, and made it more affordable, more accessible and more flexible than ever thanks to our new Tekla Structures 2021.

Better representation of non-solid lines in drawings
In drawings, overlapping non-solid (dashed, dash-and-dot, etc.) lines became misaligned and looked like solid lines. As a result, hidden objects were presented as not hidden, causing serious issues, especially related to concrete drawings. This has now been fixed. TTSD-19926

Longer IFC2x3 export output file path
The Output file path character limit has been increased from 72 characters to 247 characters. TTSD-32135

Export Unitechnik (79)
- Quotation marks for object names consisting of strings with multiple words
You can now designate object names that consist of strings with multiple words separated by blank space using quotation marks. This can be done on any name list field within the export settings, such as the embed options on the Embeds tab. TSAC-5345
- External definition file - New way to control exported reinforcement
An external definition file can be used to overwrite type and designation information, which is usually determined automatically from model objects. You can specify the reinforcement definition file on the Reinforcement data tab. The definition file is a .csv file, with a fixed structure. TSAC-5475

Export ELiPLAN file (68): New UDA for unit conversion
You can now specify a UDA for the unit conversion on the Data settings tab. When a valid unit is specified in this UDA, then it is used for the unit conversion instead of the default unit, or the unit defined in the conversion file. TSAC-5475

Inprovements in Tekla Structures extension manager
In Tekla Structures extension manager, you can now list the extensions by type: extension or environment. You can now also search for content based on name, author, description, and type of extension.
Sorting extensions by date now correctly reflects the date format of the system locale. TTSD-25796

New steel components
Tekla Structures 2021 SP2 introduces the following new steel connection components:
- Wooden purlin shoe (15) creates a connection between a steel beam and a wooden purlin. A purlin shoe is welded to the steel beam in which a wooden purlin is fitted. You can use various profiles to create the purlin shoe, for example, U-shaped and L-shaped profiles. TSAC-5187

- Simple bolt connection (5) creates a bolted connection between two steel profiles. TSAC-5186

- Windbracing 2 (16) connects a single hollow brace to a beam or a column using a connection plate, threaded rod, and nuts. Round plates are welded to the connection plate and the connection plate is bolted to the beam or column.TSAC-5188

Improvements in Rebar coupler and anchor tools
Rebar coupler and anchor tools have many improvements in Tekla Structures 2021 SP2.

New numbering series options
Rebar coupler, Rebar end anchor, and Rebar split and add coupler have been changed so that on the Parameters tab, there are new Inherit from options for the coupler part and assembly numbering settings (prefix and start number):
- None
The tools work as before and part/assembly numbering series is the one defined in the dialog box.
- Rebar
The numbering series values are taken from the primary rebar numbering series.
- Cast unit
The numbering series values are taken from the cast unit numbering series of the primary rebar cast unit. TSAC-5098

UDAs for coupler and end anchor
Rebar coupler, Rebar end anchor, and Rebar split and add coupler now have a new Coupler attributes tab that allows you to set various UDA values for the coupler or end anchor part. For each UDA, you can select to inherit the value from the rebar or the cast unit. To enter any value, select the inherit option None.
Note that if the cast unit does not have any value for that particular UDA, the value is taken from the main part of the cast unit. By default, you can enter a Comment and values for User field 1 … 4 UDAs on the Coupler attributes tab.
You can customize the set of UDAs by modifying the UDA fields in the RebarCouplers.Udas.dat file. You can find an example of RebarCoupler.Udas.dat in ..\Environments\common\system. TSAC-4557

Improvement in rebar coupler creation
Rebar coupler has been changed so that couplers are always created, even when the actual gap between rebar ends is larger than the length of the coupler. An additional warning message is shown in the status bar if the actual free space is larger than the coupler length. The coupler length is the length given in the dialog box, and for a custom part coupler it is the physical extreme length of the custom part. Earlier, only an invalid coupler part was created to indicate the possible error situation. TSAC-5176

Usability improvements
Rebar coupler and anchor tools have several usability improvements:
- You can now split rebar sets similarly as rebar groups with the Rebar split and add coupler component. TSAC-2648
- When creating rebar couplers and end anchors with rebar sets, a line preview is now shown to better indicate where the components will be created. TSAC-5374
- Rebar end anchor now creates end anchors that are not valid as cubes to distinguish them from valid anchors. TSAC-5075

Rebar shape manager: Compare selected bars to existing shapes
In Rebar shape manager, you can now compare selected reinforcing bars in the model to the existing bending shapes in the RebarShapeRules.xml files. To do this:
1. Select reinforcing bars in the model.
2. On the File menu, click Editors > Rebar shape manager.
3. The Rebar shape manager dialog box opens.
4. In the Model rebars list, select the bar shape that you want to compare.
5. If you need to select other bars in the model, click the Get selected button first.
6. In the Shape catalog list, select an existing bending shape.
7. Click the Compare to selected button under the Shape catalog list to compare the selected shape to the existing shape.
In the Bending shape rules list, you can see the passed rules in green and the failed rules in red. An additional warning dialog box is shown if there are other reasons for mismatches between the shapes.
If needed, you can then modify either the bar shape in the model or the bending shape rules in Rebar shape manager. TSAC-4568

Fixes

TSAC-1340 Concrete components Rebar end anchor: The status bar instructions for applying rebar end anchors to rebar set ends have been improved.
TSAC-1830 Concrete components Wall layout opening: Previously, loading filler part properties from a file and then applying them did not work properly if the file contained some special characters (non-English characters). This has now been fixed.
TSAC-3817, TSAC-3021 Concrete components Wall layout: Wall panel geometry is now created properly also when an opening is located at the exterior edges and corners.
TSAC-4224 Concrete components Wall layout opening: The minimum size of the openings that can be created has been lowered. Originally, the size was 50 x 50 mm for square openings and 50 mm for the radius of circular openings. Now the size has been lowered to 10 x10 mm and 10 mm for the radius of circular openings.
TSAC-5070 Concrete components Rebar coupler, Rebar end anchor: Previously, the components did not use the custom component input option value controlled by Use auto attribute file. This has now been fixed. Changing the input point option in the component property dialog box with Use manually entered values worked correctly.
TSAC-5071 Concrete components Rebar coupler and Rebar end anchor components have been modified so that they now clear all rebar UDA values if the coupler or end anchor is not valid.
TSAC-5073 Concrete components Rebar coupler: When creating a rebar coupler, Tekla Structures now checks the splitter overlap and shows a warning if it is not zero (or less). Status bar instructions for creating the component have also been improved and a warning is now also shown if the input is not valid, for example, if you select a part.
TSAC-5240 Concrete components Reinforcement mesh array (91): Integers are now used for mesh sizes when calculating the overlapping of the meshes. This means that instead of shortening the mesh to 0.99, the mesh size is rounded up to a full mesh and the overlapping is increased.
TSAC-5258 Concrete components Reinforced concrete stair (95): End condition settings for the rebars created on the Bar H tab are no longer applied when they are hidden as not to be used for particular rebar shapes.
TSAC-5465 Concrete components Mesh bars: The Cut bars by negative neighbor parts option on the Bar end conditions tab has been improved. The detection of the neighbor negative parts for bars cut by the opening has been fixed.
TSAC-5488 Concrete components Wall layout: Geometry calculation has been changed to properly handle situations where the opening goes outside the original exterior perimeter.
TSAC-2651 Steel components U.S. Base plate (1047): It is now possible to set the Gage material UDA for the leveling plate on the Parts tab.
TSAC-5108 Steel components Pipe column and beam panel zone (21): The short column name is now taken from the main part name by default.
TSAC-5109 Steel components Pipe column and beam panel zone (21): By default, the appropriate diaphragm thickness is now calculated taking into account all beam flange thicknesses and the level position.
TSAC-5159 Steel components Welded beam to beam (123): Previously, the secondary part bottom flange was not cut correctly. This has now been fixed.
TSAC-5308 Steel components Tube gusset (20): Previously, assembly numbering of the gusset plate was not correctly set when the component was used to create a connection to an I profile main part.
TSAC-5463 Steel components Shear plate simple (146): Previously, the distance between the bolts and the secondary beam edge was not correct. This has now been fixed.
TSAC-5491 Steel components Two sided end plate (142): Previously, unwanted bolts were created in some situations. This has now been fixed.
TTSD-23135 Import, export, interoperability Previously, importing attributes by object GUID did not import attributes for bolts, welds and rebars. This has now been fixed.
TTSD-35277 Import, export, interoperability Export drawings to DWG/DXF: The drawing export now supports loading settings with a macro.
TTSD-37633 Import, export, interoperability The view size property Fit by parts no longer shows un-cut solids.
TTSD-42577 Import, export, interoperability Non-rectangular wall panels are now imported from Tekla Structural Designer to Tekla Structures as rectangular walls with a height equal to the enclosing rectangular shape. Previously, non-rectangular wall panels caused an error, which resulted in the failure to import any of the model.
TTSD-43777 Import, export, interoperability IFC2x3 export: The z level failed in the export in Tekla Structures 2021 if the base point local z coordinate was used. This has now been fixed.
TTSD-43959 Import, export, interoperability When transferring design intent reinforcement for Tekla Structural Designer walls with multiple zones, starter bars are now created into the foundation depth. Tekla Structural Designer 2021 SP2 or later is required.
TTSD-44032 Import, export, interoperability Export drawings to DWG/DXF: An application error occurred when you loaded settings in the Export drawings to DWG/DXF dialog box. This has now been fixed.
TTSD-44041 Import, export, interoperability Export drawings to DWG/DXF: If the advanced option XS_DWG_EXPORT_3D_MODEL_COORDINATES was set to TRUE, the template was displayed in the model space instead of the paper space. This has now been fixed.
TTSD-44413 Import, export, interoperability Trimble Connector: When you upload your model to the linked Trimble Connect project as a .tekla model, the export can now read profile information (profitab.inp file) from XS_PROJECT and XS_FIRM folders.
TTSD-44418 Import, export, interoperability The profile conversion files used in import and export between Tekla Structures and Tekla Structural Designer have been fixed. Each conversion file line now contains one profile entry with the neutral file profile name, the # symbol and the profile code, and then the equal sign (=) followed by the Tekla Structures profile name.
For example: STB 229x305x70#00610=TEE229*305*70
Note that you may need help from your local Tekla support with the conversion files.
Also, several errors in the conversion for US metric profile names have now been fixed.
TTSD-44467, TTSD-44858 Import, export, interoperability In the Tekla Structural Designer Import dialog box under Rebars > Creation options, the Simplify bars check box is no longer selected by default.
If you select the Simplify bars check box, the following warning message is displayed:
'Design information linked to end detail modifiers (hooks) and splitters (laps, cranks) will not be imported'
The message will disappear when you clear the Simplify bars check box.
TTSD-44504 Import, export, interoperability IFC object conversion: Now the conversion supports the copying of the object type (IfcRelDefinesByType) property set property to UDA.
TTSD-44628 Import, export, interoperability IFC4 export: Sometimes exporting objects with a certain chamfer caused a Tekla Structures application error. This has now been fixed.
TTSD-44639 Import, export, interoperability IFC object conversion: The IFC object conversion now converts solid model presentation objects.
TTSD-44678 Import, export, interoperability IFC2x3 export: The export did not export the object location correctly with edge chamfer offsets. This has now been fixed.
TTSD-44725 Import, export, interoperability Some HP profiles, hollow sections and pipes were not included in the standard profile conversion, resulting in "Missing profiles detected" messages when imported from Tekla Structural Designer for US Imperial and US Metric models.
TTSD-44739 Import, export, interoperability In the Tekla Structural Designer Import dialog box, the Single bars only check box has been removed from Rebars > Creation options as it was not used in the import.
TTSD-44983 Import, export, interoperability IFC object conversion: The IFC B-rep to extrusion object conversion sometimes created beams to bottom of the object and location failed. This has now been fixed.
TTSD-45287 Import, export, interoperability IFC4 export: The IFC4 export file name with a dot removed the rest of the file name. This has now been fixed.
TTSD-45387 Import, export, interoperability The advanced option XS_DISABLE_CIS2 has been removed from the Advanced Options dialog box. This advanced option is an old option that does not work anymore.
TPLED-200 Templates and reports Template Editor:
The following issues have now been fixed:
- Previously, if a template contained a rule-defined picture object, Template Editor still prompted for unsaved changes after the template had been saved.
- Previously, after saving the template with a new name, the new template file name was not updated to the title bar of Template Editor.
TPLED-201 Templates and reports Template Editor: Editing the font color of multiple text objects worked only the first time the font color was changed. This has now been fixed.
TTSD-28819 Templates and reports Tapered rebar pull-out dimensions were incorrect in the PDF report output. This has now been fixed.
TTSD-44152 Templates and reports Missing definitions in pull-out height and width parameters in templates could cause Tekla Structures to crash. This has now been fixed.
TTSD-44409 Templates and reports When an xls report was created and opened in Microsoft Excel, Microsoft Excel could freeze if the report contained references to image files with long paths. The reason was that the valuefield content was longer that the length specified for it, and therefore the path to the image file was cut. This has now been fixed so that if the valuefield content starts with the text '<IMG' and ends with the character '>', the path is not cut.
If the above case is discovered during template output, a warning message is written to the log indicating the maximum length and the path to the template file.
TSAC-4236 Drawings Rebar pull-out picture and marking: The usage of the rebar_config.inp file settings in Rebar pull-out picture and marking application has been improved. Now, settings like ScheduleDimensionRoundingAccuracy and PullOutShowDuplicateDim are taken correctly from rebar_config.inp.
Note that some of the settings in the rebar_config.inp file might be overwritten when Rounding settings on the Dimensions tab is set to By users setting.
TTSD-26968 Drawings Reference object hidden lines were displayed in drawings even though they were disabled when the line type and color of the lines matched the properties of the visible lines. This has now been fixed.
TTSD-38134 Drawings The positioning of the level mark base points in drawing update has been improved. Holding down Shift and dragging the level mark away from the part keeps the valid associativity data (just like when you use the Move linear command).
TTSD-39486 Drawings Internal view coordinates were sometimes corrupted, which caused wrong placing of the drawing views. This has now been fixed.
TTSD-41773 Drawings Reflected views now work correctly in drawings.
TTSD-42531 Drawings Snapping to center lines now works identically in drawing and modeling modes: Center lines are snapped to when the Snap to geometry lines/points switch is enabled. Center lines are no longer snapped to in drawings when the Snap to reference lines/points switch is enabled.
TTSD-43250 Drawings Part center line associations that were saved incorrectly in some cases are now saved correctly.
TTSD-43450 Drawings Document manager: Exceptions occurred when you rapidly toggled data cell values by editing those directly in columns that you sorted. This has now been fixed.
TTSD-43854 Drawings Sometimes, the part to grid dimensioning in GA drawings did not work correctly. This has now been fixed.
TTSD-43906 Drawings Level marks are now placed correctly when a part has been modified. A zero level mark no longer gets a change cloud if only the sign (+ or -) changes.
TTSD-44330 Drawings Tiny dimension rule associativity lists are no longer displayed if associativity rules are not found for dimension points.
TTSD-44476 Drawings Previously in some cases, reflected views in drawings could cause Tekla Structures to crash. This has now been fixed.
TTSD-44644 Drawings Printing: The Print on multiple sheets option was not working correctly. This has now been fixed.
TTSD-44973 Drawings More DWG files are now supported in drawings when adding them as extra objects.
TSAC-4571 Reinforcement In Rebar shape manager, two new built-in geometrical properties are now available for circular arc legs:
- Arc width (AW)
- Arc height (AH)
TSAC-4885 Reinforcement In Rebar shape manager, the unknown rebar shapes are now read from the first RebarShapeRules.xml file, following the same reading order as the other, recognized shapes. Previously, the unknown rebar shapes were read from the last RebarShapeRules.xml file.
Note that if you modify the rebar shapes and then save the rebar shape definitions to the model folder, you need to reopen the model to apply the changes.
TSAC-5211 Reinforcement In Rebar shape manager, the value of the REVERSED property is now calculated correctly for curved bars.
TSAC-5212 Reinforcement In Rebar shape manager, the value of the Arc length (AL) property is now calculated more accurately for curved bars, regardless of the modeling direction.
TSAC-5515 Reinforcement In Rebar shape manager, the curved bar arc length and angle were not correctly reported when the bar had hooks and the advanced option XS_REBAR_RECOGNITION_HOOKS_CONSIDERATION was set to FALSE. This has now been fixed.

TTSD-39155 Reinforcement Rebar groups have the following three issues fixed:
- Rebar group bars in a tapered rebar group with non-planar bar geometry were in some cases incorrectly offset from input points. This has now been fixed not to occur when creating new rebar groups. To get existing rebar group offsets fixed, you need to modify them.
- Tapered rebar groups which have exact spacings as the creation method and spacings defined so that there are too many bars compared to the group length were incorrectly handled in mirroring. This has now been fixed.
- The mirroring of tapered rebar groups containing non-parallel straight bars has now been fixed.
TTSD-42373 Reinforcement Rebar splice: In some cases, rebar splices could not be selected when the Select rebar sets selection switch was active. This has now been fixed.
TTSD-43341 Reinforcement Previously, rebar set modifiers sometimes became visible when you modified the part the rebar set bars were attached to. This has now been fixed.
TTSD-43922 Reinforcement Rebar sets: For some rebar sets, a value below 2 for the Minimum number of bars in similar group UDA could cause a crash. This has now been fixed.
TTSD-44455 Reinforcement Rebar sets: Sometimes when you dragged a rebar set guideline or modifier, its line handle was left in the original location. This has now been fixed.
TTSD-44717 Reinforcement Rebar sets: Sometimes, when using rather big concrete covers, some bars were incorrectly shortened around holes. This has now been fixed.
TTSD-15650 Modeling Multi-user: In some cases, numbering old standard part models could cause Tekla Structures to crash. This has now been fixed.
TTSD-21254 Modeling Previously, autosave files were deleted without a new save being successful. This has now been fixed.
TTSD-41620 Modeling In some situations, Tekla Structures could crash when saving or autosaving the model. This has now been fixed.
TTSD-42041 Modeling If XS_ENABLE_POUR_MANAGEMENT is switched to FALSE in a model with cast-in-place concrete parts that form pours, you can now use the Diagnose & repair model commands to remove the obsolete pours from the model. Previously it was not possible to remove them, even by deleting the parts that formed the pours.
TTSD-43767 Modeling If a pour break was created at the border of two separate parts, and one of the parts had a touching opening, the pour break might fail. This has now been improved.
TTSD-43838 Modeling Sometimes perpendicular snapping happened to an unrelated, distant point. This has now been fixed.
TTSD-44110 Modeling Batch editor:
- Previously, copying from a component assembly to an assembly with an exploded component resulted in extra parts. This has now been fixed.
- Previously, copying an assembly inside a component did not copy anything. This has now been fixed.
TTSD-44114 Modeling Batch editor now handles better the cases where a component has created the whole assembly.
TTSD-44240 Modeling Previously, coloring of some objects was not correct if you changed the value of the XS_USE_INTEGRATED_BUILDING_HIERARCHIES advanced option. This has now been fixed.
TTSD-44485 Modeling Batch editor now opens the help when you press F1 on the dialog box.
TTSD-44489 Modeling Previously, when selecting a part to be split, grid got priority for the selection even if the Select grid selection switch was off. This has now been fixed, and parts are preferred over grids.
TTSD-44558 Modeling Batch editor dialog box now by default resizes its size in horizontal direction based on the amount of columns.
TTSD-44559 Modeling Batch editor now automatically refreshes the Validation column for newly added targets when they are added.
TTSD-44674 Modeling Previously, the Split command sometimes split the wrong object if there were several nearby objects that were overlapping, touching, or otherwise close. This has now been fixed.
TTSD-44693 Modeling Previously, the workplane changed to model origin if you typed the values, for example, when you extended a beam. This has now been fixed.
TTSD-44730 Modeling Previously, Batch editor might crash when copying from exploded source to targets generated by components. This has now been fixed.
TTSD-44731 Modeling Batch editor works now more reliably in cases where properties need to be copied from components to exploded targets.
TTSD-44811 Modeling Previously, using the Split command on plates or slabs allowed to pick points outside the part. This is now prevented, and only points within the part to be split can be picked.
TTSD-44825, TTSD-44490 Modeling Previously, when creating bent plates using any component child parts, the bent plate creation did not succeed and the original parts were deleted. This has now been fixed.
TTSD-44895 Modeling Batch editor now works with corner chamfers.
TTSD-45092 Modeling Building hierarchy previously stored sub-assemblies to the floor. This has been changed. Sub-assemblies now inherit the floor from the main assembly.
TTSD-45523 Modeling Previously, Move/Copy point or part handle command switched the coordinate system to model origin. This has now been fixed.
SOLD-1674 Licensing Tekla Model Sharing licenses are now released properly again when you close Tekla Structures.
TTSD-43328 Core The object database cleanup after object deletion has been improved.
TTSD-43403 Core Sometimes Tekla Structures could crash at startup. This has now been fixed.
TTSD-44194 Core Previously, some large solids could cause memory buffer overruns. This has now been fixed.
TTSD-44427 Core Previously, Tekla Structures crashed when the bolt visibility was set to Exact in 3d views. This has now been fixed.
TTSD-44980 Core Previously, Tekla Structures could crash when saving. This happened when the model folder had files with unsupported unicode names. This has now been fixed.
TTSD-35472 Tools and components Applications & components catalog: It is now possible to generate a troubleshooting dump file that shows all the data used to construct the selected component or group in the Applications & components catalog. The file is by default stored in the model's \local\temp folder.
- To activate the file generation command, first click the Access advanced features button > Catalog management > Show dump command for selected component or group. Then select the component or group in the catalog, right-click and select the Dump troubleshooting data command. In the dialog box that opens, you can change the target file path and file name. Click Save to save the file.
TTSD-41874 Tools and components Array of objects (29): The limitation of maximum 256 copies has been removed.
TTSD-42333 Tools and components In some cases, when modifying custom component parameters, if you wanted to undo the modification, you had to perform the undo command twice. This has now been fixed.
TTSD-43422 Tools and components Previously, when custom components that contained plugins were imported, an error dialog box was shown and a failure message was written to the log. This does not happen anymore.
TTSD-45032 Tools and components Applications & components catalog: Hiding predefined groups, such as Ungrouped items, in the catalog is not possible anymore.
TTSD-45196 Numbering If you cancelled the save-numbering-save operation, Tekla Structures might sometimes crash. This has now been fixed.
TTSD-38333 User interface Previously, in some rare cases, there was an error in the property pane about object reference not set to an instance of an object. This has now been fixed.
TTSD-43674 User interface The Define custom component command now has a scalable vector icon available.
TTSD-44683 Import, export, interoperability (steel) NC/DSTV: In certain situations, slotted holes were incorrectly rotated in the exported NC/DSTV files. They were rotated 90 degrees out compared to the actual model orientation, see the image below:

This happened when the plate width was greater than the plate length, and the advanced option XS_USE_NEW_PLATE_DESIGNATION was set to TRUE or to FOR_STEEL_PARTS_ONLY. This has now been fixed.
TSAC-4953 Import, export, interoperability (concrete) Export Unitechnik (79): A new option has been added to the Auto-rotate on pallet list on the TS configuration tab. When the Auto-rotate on pallet option is selected, the element is rotated based on the fixed set of rules defining that the longer edge with no cuts or protruding embeds is at the bottom edge of the pallet. For the Auto-rotate on pallet option, you can also select if the default rotation direction is To long even edge (clockwise) or To long even edge (counterclockwise).
TSAC-5390 Import, export, interoperability (concrete) Export Unitechnik (79): You can now export also cut parts using the Opening with a corner symbol setting on the Embeds tab.
TSAC-5400 Import, export, interoperability (concrete) Export Unitechnik (79): Previously, braced girders with alphanumeric rebar sizes caused problems with girder depth position. This has now been fixed. Braced girder rod diameters are now obtained correctly based on the Reinforcing bars diameter setting on the Reinforcement tab.
TSAC-5410 Import, export, interoperability (concrete) Export ELiPLAN file (68): The data conversion file now supports the wildcard "*" in regular expressions in the first column for finding strings from Tekla Structures objects.
TSAC-5435 Import, export, interoperability (concrete) Export Unitechnik (79): Previously, the UT_REBAR_TYPE UDA was not read for rebar sets. This has now been fixed.
TSAC-5471 Import, export, interoperability (concrete) BVBS Export: All bending and arc angles are now rounded to the nearest 0.5 degree. For example, 89.8 degrees will be rounded to 90 degrees.
Features :

Simplify the creation of object lists with the new list manager
The list manager extension improves quality and productivity by enabling more efficient listing and reporting of Tekla model objects with fully trackable properties. Accuracy is assured and human error minimized to allow focus on productive detailing while Tekla manages the model.

Clarify numbering, marking and documentation with Curved & Similar Rebar Grouping
Minimize the amount of work you need to do in documentation and listing by combining curved marks into a single mark with sub ids. Building on the tapered group technology, we have provided more automation in the places you want it, but with added flexibility to change parameters on a rebar set level. Change how you group bars based on the geometry or project you're working with to achieve the most productive, fabricatable detailing to date.

Quickly understand rebar spacing and modifiers with the new Follow Edges functionality
Break away from the multi point picking of modifiers on rebar sets when it comes to complex rebar edges. With the new ‘follow edges’ technology, you can tell a modifier or guideline to follow an edge explicitly. This new feature allows you to model reinforcement in curved or non linear objects and split, add hooks or orientate the bars based on the geometry edge itself.

Easily Update Drawing Specific Layouts
In Tekla Structures 2021, new functionality to the drawing layout feature offers the possibility to make small changes to title blocks and reports while also being able to exclude certain updates from being saved to an existing layout. This means you are able to update just one title block without changing them all, This keeps the number of master layouts small so it will be easier for you to manage, create and edit your project’s drawings.

Express your project intent with the new Trimble Connect Visualizer
The Trimble Connect Visualizer can now render your own custom textures, and user defined colors instead of standard defaults. This functionality will enable you to present your project or express your intent to position the unique approach you will take to the project. With the new Visualizer, you will see material exactly how it would look like in real life, no matter how specific and custom your surface finishes, concrete finishes, paints, and other material may be.

Save Time and Money with the Fit Objects Extension
Utilizing the new Fit Objects extension, users can save time, reduce errors, and offer more accurate and profitable QTOs. This tool fits any two objects together and keeps them connected, even after changes in the project occur. The tool expands the capabilities of existing fitting commands and makes it easier to, for example, connect columns and walls to sloping slabs or connect inclined slabs to landings.

Take advantage of the New Shape Catalog to keep track of imported shapes
In Tekla Structures 2021, you can continue to add value to your models by importing shapes like .skp, .ifc files, DWG’s, DGNS, etc., but now you can more effectively keep track of all these changes. With a fresh new look to the Shape Catalog, you will also experience improved performance with clarity in organizing BIM parts, sorting shapes, creating groups and/or tree structures, as well as the ability to add tags, star shapes and other actions you might need to keep track of your imported shape changes.

Experience enhanced solid object handling
Tekla software now uses a more efficient way to handle geometries of duplicated objects. This results in better performance such as faster model, view and drawing opening, faster numbering and export operations, and better solid handling. Furthermore, numbering of identical parts yields more reliable results.

Take advantage of the new Copy/Move preview
If you need to move or copy objects within your Tekla Structures model, you will experience an updated copy and move preview in the newest release. With this new update, you can visualize where copied or moved objects will appear to clearly determine what and where you are copying/moving objects before committing to their location. What you see is what you get!

Access to drawings is easier than ever before
Access related fabrication drawings quicker than ever from the contextual toolbar with this new feature. When selecting model objects you can now see a list of related drawings and open them directly from the model without the document manager.

Improvements in drawing associativity
The new version keeps improving on drawing dimension associativity, with new support for dimension tag content. Additionally, users can associate dimensions to objects during creation of the dimension. With this added control, users can be confident that drawing dimensions can react correctly to changes in the model and /or cloning of the drawings.

New options for bolts
The Bolt command has now been extended to include Blind and Partial hole options. These are especially beneficial when modeling aluminium curtain walls or other special steel structures.

Easier editing of identical assemblies and cast units with Batch editing
Save time and reduce repetitive rework with the new Batch editing functionality in Tekla Structures 2021. Great for project changes that come late in the design, utilizing this feature means you won’t be spending tedious time making multiple updates to identical assemblies or cast units within the same number series. You can now copy modifications to identical or similar assemblies in just one click.

Quickly identify the graphic card you are using
Utilizing the new graphics card command, you can easily check and understand the hardware you are using and if it is suitable for Tekla and configured correctly.

Take advantage of the new Instructor Pane for self learning
Whether you’re a new user looking for guided support or someone just looking for a helpful reference, the new Instructor Pane will provide guided tips and quick insight on topics in modeling and drawing mode. This functionality is available in all 16 UI languages and enables the user to access support in their local language, even if they are using a different language in the user interface.

See model changes with Overlay model improvements
Users now have the ability to see a list and view of changes between two selected .ifc or .tekla models. Trimble Connect overlay models now offer full historical and visual identification of changes even from the very first upload. This functionality helps to detect and adjust work based on reference model updates. Additionally, updates to this tool now enable hierarchical objects in overlay models for objects such as assemblies, cast units and pour units. The Tekla Structures’ clip plane feature can now also be used with overlay models for easier examination of a model.

Drawing annotations in Trimble Connect 3D web viewer
After you have created a drawing, you can now publish drawing annotations into Trimble Connect. This allows you to view the dimensions in the 3D model view, giving you both the geometry and the dimension or other annotations like material, weld information or other part marks. This makes your 2D drawings into a 3D format and with this enriched 3D model, your drawing can now be used for fabrication.

Capitalize on improvements in precast interoperability
In the newest versions of Tekla Structures, we continue to actively maintain and invest in extending the link of our highly utilized interfaces to automated machinery within the precast industry, increasing the efficiency for you as our customer. Tekla offers interfaces to hollowcore, wall production, rebar cut and bend manufacturing solutions using BVBS, Unitechnik, PXML, ELiPLAN / FloorMES and more.

New extension to combine IFC 2x3 with BVBS
This new extension gives you the ability to export IFC for production while also embedding cut and bend (BVBS) fabrication data to provide the level of detail needed for rebar cut and bend information.

Enjoy improvements in the Stacker & Palletizer Tools
You can now enjoy the improved functionalities of visual planning for transportation (Stacker) and pallet occupation (production planning) by Palletizer. These tools help you optimize your production and transportation capacities to make you more efficient and more profitable on your next project.

Optimize your material usage with new Rebar Nesting
You can now generate cutting patterns for rebars to reduce waste during rebar cutting with the new Rebar Nesting functionality in Tekla Structures. With the new extension you can calculate the optimal amount and length of stock length rebar (e.g. 12m, 16m, etc.) based on selected rebar or the rebar in the entire model. Results can also be exported to text files for further processing in tools like Microsoft Excel. This increases your efficiency in accomplishing the task and brings clear improvements towards waste reduction and cost optimization for your next project.

‘Upload model’ in Trimble Connect Now Supports pours and gridlines
Utilizing the “upload model” functionality means users can upload a Tekla Structures model to Trimble Connect from any phone or tablet. This functionality means you don't need to have access to a native model in order to inspect it or inquire model data. With Tekla Structures 2021, users can now also export a model from Trimble Connect with grid lines, pour objects and pour units. If you have pours in your model, these will get exported instead of CIP parts. Additionally, using the syncing features of Tekla Model Sharing (which means that updates can be automatically updated with every write-out), users on a project can consistently have an up to date model even with models that are modelled by a series of people, at the same time.

Utilize Clash check improvements in Tekla Structures 2021
The ‘Clash Check” functionality has been enhanced in the newest release of Tekla Structures, making finding clashes more reliable and faster. The improvements are particularly evident when the check contains a reference model where a support base point can be inserted. The Clash Check Manager user interface has also been updated to have check boxes for advanced options like whether the clash check includes clashes between reference models and clashing objects inside reference models. A progress bar has also been added to indicate the current clash check's status and enables the cancellation of the action.

More flexibility in detailing stairs
The spiral staircase functionality has been improved in Tekla Structures 2021. Also, a new straight staircase tool has now been added. The enhanced stair components now include all common shapes: straight stair, L and U shaped stairs, and spiral form.

New way of modeling concrete stairs
New extension for modeling concrete stairs includes all common shapes including straight stair, L and U shaped stairs, and spiral form. This easy to use tool will make the modeling of any stair shapes easy and straightforward.

Enhanced crane tool
The new Crane Tool extension is the next evolution of the Crane capacity check tool and offers new functionalities that help you save costs, make fewer errors and improve safety during the erection phase of your next project. The tool supports all typical cranes: tower, mobile and crawler cranes and allows you to do lift simulations, lift checking (capacity, range, height and supply point) and erection time calculations. Whether you are the engineer or the erection planner, you will have a complete set of tools that help you optimize the design, erection costs and make it safer. Because the erection phase makes up such a significant part of project costs, planning your crane operations can bring considerable cost benefits and make you more profitable. Finally, for those companies that rent out cranes, this tool will also allow for easy input of capacities for your equipment and give you ability to share that information to your customers.

New tool available for panelizing insulation in a wall
This new component helps you increase your productivity by automatically detailing the insulation of your walls using actual insulation panel sizes that will be used in manufacturing. You can easily optimize the distribution of insulation panels, reducing waste in manufacturing. The Panelizer will also produce data about individual insulation panels for automated fabrication where needed. As this new tool can be used to split any panel or plate into smaller pieces, it can also be used for modeling e.g. grating or masonry work.

Explore the new Pour performance improvements
The newest pour performance improvements are a big win for those working with concrete pours. The host of improvements to our patented pour technology make planning concrete pours faster and more straightforward. Enhancements include updates to processes such as opening models with pours, working with pours breaks, modifying CIP objects, and calculating pours units which will all enable you to work more efficiently and win more profitable work.

New Scaffolding tool (extension) offers brand new functionality to Tekla Structures 2021
The newest scaffolding tools offer new functionality that has never been available in Tekla Structures, until now. Based on customer feedback, this tool will enable customers to plug in their scaffolding systems into the model and start placing the components with intuitive placing automation. This tool is useful either if you are using scaffolding as shoring, which supports the horizontal formwork, or the access scaffolding, which gives workers access to move around the construction site.

Navisworks and Revit import available as reference files (extension)
To achieve smooth construction workflows and the realization of designs, we at Trimble Tekla are committed to an open approach to BIM. With this open approach, we hope to enable project members to collaborate seamlessly throughout design and construction, regardless of the software solutions they use. Currently, IFC (Industry Foundation Classes) offers the most viable option for everyday open BIM. Through IFC, Tekla links with AEC, MEP and increasingly with plant design software.

Renewed slab and plate splitter Available in Tekla Structures 2021
If your next project requires you to split existing plates or slabs, you can utilize the new renewed slab and plate splitter functionalities in Tekla Structures 2021. The newest split command uses newer methods like direct manipulation and pour break algorithms to split slabs and plates in a more reliable and user-friendly manner.

Operating system requirements:
64-bit Windows 10
64-bit Windows 8.1

此帖售价 29 电魂,已有 12 人购买 [记录] [购买]

购买后，将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!

此段为出售的内容，购买后显示