论坛风格切换
正版合作和侵权请联系 sd173@foxmail.com
 
  • 帖子
  • 日志
  • 用户
  • 版块
  • 群组
帖子
购买邀请后未收到邀请联系sdbeta@qq.com
  • 13662阅读
  • 24回复

[行业软件]Altair SimSolid 2023.1 [复制链接]

上一主题 下一主题
离线pony8000
 

发帖
53392
今日发帖
最后登录
2024-11-24
只看楼主 倒序阅读 使用道具 楼主  发表于: 2021-05-13 09:06:11

Altair SimSolid 2023 | 548.6 mb

The software developer Altair is pleased to announce the availability of SimSolid 2023.0 is a structural analysis software developed specifically for rapidly evolving design processes, enabling the analysis of fully-featured CAD assemblies in minutes without meshing.



Altair SimSolid 2023 Release Notes

Highlights
- Sequential loading with nonlinear geometry
- Imported virtual bushings
- Contour plots in local coordinate system
- Improved solution settings
- Spatial reader

New Features

Sequential loading with nonlinear geometry
Structural sequential analysis, where multiple structural analyses can be linked to each other, is now supported for structural non-linear geometric analysis. You can access this function from the Analysis menu, the Analysis workbench toolbar, or by right- clicking on a supported structural analysis to create a linked analysis.
Imported virtual bushings
Virtual bushings under connections can now be imported from a .csv file. To import a virtual bushing; the bushing coordinates, linear and rotational stiffness along all the three axis, and a coordinate system are required. The bushings are mapped based on the specified diameter. It is connected to two parts that fall within the specified diameter from the input coordinates.
Contour plots in local coordinate system
All contour plots for structural and modal analysis can now be plotted along a local coordinate system. The local coordinate system can be Cartesian or cylindrical. The Set Output Coordinate System settings can be accessed from the legend. Pick info and Result graph outputs results based on the output coordinate system.
Improved solution settings
Solution settings have been re-factored to have two higher level adaptations called Global and Global + Local. Global adaptation is best for general load path prediction, modes and/or thermal analysis.
- Uses three adaptive passes and Adapt to thin solids
- Refinement level is set to Standard
- Only uses global adaption
Global+Local is best for stress calculation with more precision.
- Uses four adaptive passes
- Adapt to features
- Adapt to thin solids
- Automatically creates local group for the parts and segregates based on its relative volume
- Can be used for both global and local adaptations
- Refinement level is set to Standard
In addition to higher level adaptations, there is a new option available under custom solution settings that automatically creates local groups for the parts and segregates them based in its relative volume.
New approach for bolt tightening
Bolt/nut tightening is now performed as active load. The target axial force is now precisely achieved.
Fatigue based on structural nonlinear
Fatigue analysis can now reference structural nonlinear analysis with separating contact. This is supported in addition to structural linear analysis.
Import remote loads with custom coordinate system
Imported remote loads from a .csv can now reference a custom coordinate system in addition to the global coordinate system.
Product editions
Product editions can now be selected from Settings > License. Product editions including Basic, Standard and Advanced are available. In addition to them, a Trial edition is also available that gives access to the Standard version for 30 days.
Re-factor material database
Material database has been re-factored such that materials can be created based on specific physics such as mechanical/thermal. Mechanical properties are not required to be input to just run thermal analysis and conversely.
Re-factor spot welds
Spot welds have been re-factored to represent 2T/3T/4T welds appropriately. All the welds are not converted into 2T welds anymore but are rather represented as created in the Project Tree. When spot welds are imported from a .csv, the order of spot welds is also maintained. In addition to spot weld re-factor, the number of spot welds are also captured in the Project Tree Spot Welds info.
Re-factor boundary conditions for dynamic analysis
You can now apply multiple boundary conditions to the same geometric entity for dynamic analysis. This allows applying different load functions along different directions. Applying multiple load functions to the same boundary condition has now been disabled.
Save RMS response to project file
RMS von-Mises stresses are also now saved to the project file after evaluation.
Solving linked analysis
All linked analysis are solved automatically without using the solve manager. This applies to all linked analysis including structural, buckling, modal prestressed, dynamics, thermal stress and squeak and rattle.
Updated CAD import formats
The list of supported CAD formats are updated.


SimSolid is a game-changing simulation technology for designers and design engineers. Its just the perfect tool to kick-start any design process.

This software completely eliminates the need for any geometry simplifications and meshing enabling you to get most out of your structural analysis in the least possible time. With SimSolid, model preparation is done within minutes. Even complex parts and large assemblies can be analysed with ease. SimSolid is tolerant of imprecise geometry and is just the right thing to accelerate your design process.

In addition, this structural analysis solution is fast, really very fast. Highly accurate simulation results are obtained within minutes! Multiple design scenarios can be quickly analyzed and compared. And, accuracy can be specified on an individual part level allowing a rapid drill down to any level of detail that is required.

This intro to Altair SimSolid video discusses some of the key benefits of SimSolid. It also contains a detailed demo and product workflow. After viewing this video, you should be able to run your first simulation within the tool.







Altair transforms design and decision making by applying simulation, machine learning and optimization throughout product lifecycles. Our broad portfolio of simulation technology and patented units-based software licensing model enable Simulation-Driven Innovation for our customers. With more than 2,000 employees, Altair is headquartered in Troy, Michigan, USA and operates 71 offices throughout 24 countries. Altair serves more than 5,000 customers across broad industry segments.

Product: Altair SimSolid
Version: 2023
Supported Architectures: x64
Website Home Page : www.altair.com
Language: english
System Requirements: PC *
Size: 548.6 mb
此帖售价 49 电魂,已有 11 人购买 [记录] [购买]
购买后,将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容,购买后显示













软件下载咨询 sdbeta@qq.com
 
精品软件:百度搜闪电软件园  最新软件百度搜:闪电下载吧
有问题联系 sdbeta@qq.com
离线ganjun2001

发帖
3508
今日发帖
最后登录
2024-11-21
只看该作者 沙发  发表于: 2021-05-13 09:51:14
      
离线haebro

发帖
57
今日发帖
最后登录
2024-03-10
只看该作者 板凳  发表于: 2021-05-13 11:46:06
SIMSOLID是一种快速,准确,稳健的结构模拟仿真技术,无需进行几何简化,清理或网格划分。 Altair Engineering是企业级工程软件的领先供应商,包括solidThinking Evolve等等。

SIMSOLID建立于一个简单的问题:“为什么设计和结构模拟世界中使用的几何必须如此不同?”

SIMSOLID是专为设计工程师开发的结构分析软件。 它消除了几何简化和网格化,这是传统FEA中最耗时和专业的两项任务。

此外,SIMSOLID可以分析与传统FEA不相关的复杂零件和大型组件,并在台式计算机上高效地完成。 SIMSOLID既快速又准确,使用独特的多通道自适应分析控制解决方案的准确性。

谢谢楼主分享!
离线zhuhongfeng

发帖
489
今日发帖
最后登录
2024-06-02
只看该作者 地板  发表于: 2021-05-13 14:16:06
谢谢分享!!!
离线scd

发帖
742
今日发帖
最后登录
2024-11-20
只看该作者 地下室  发表于: 2021-05-14 10:02:10
疲劳分析,谢谢
离线补考狂人

发帖
143
今日发帖
最后登录
2024-11-24
只看该作者 5 发表于: 2021-05-16 23:06:22
谢谢楼主分享!~
软件下载咨询 sdbeta@qq.com
 
离线geatty

发帖
233
今日发帖
最后登录
2024-11-17
只看该作者 6 发表于: 2021-05-17 00:00:11
a structural analysis software developed specifically for rapidly evolving design processes
离线蓝天空

发帖
882
今日发帖
最后登录
2024-11-23
只看该作者 7 发表于: 2021-05-17 06:34:22
谢谢楼主分享   
离线tangqianfeng

发帖
2163
今日发帖
最后登录
2024-11-22
只看该作者 8 发表于: 2021-05-17 06:58:46
kkkkkkkkkkkk
离线karaser

发帖
391
今日发帖
最后登录
2024-11-23
只看该作者 9 发表于: 2021-05-17 07:06:57
谢谢分享