Altair SimSolid 2023 | 548.6 mb
The software developer Altair is pleased to announce the availability of SimSolid 2023.0 is a structural analysis software developed specifically for rapidly evolving design processes, enabling the analysis of fully-featured CAD assemblies in minutes without meshing. Altair SimSolid 2023 Release Notes Highlights
- Sequential loading with nonlinear geometry
- Imported virtual bushings
- Contour plots in local coordinate system
- Improved solution settings
- Spatial reader
New Features Sequential loading with nonlinear geometryStructural sequential analysis, where multiple structural analyses can be linked to each other, is now supported for structural non-linear geometric analysis. You can access this function from the Analysis menu, the Analysis workbench toolbar, or by right- clicking on a supported structural analysis to create a linked analysis.
Imported virtual bushingsVirtual bushings under connections can now be imported from a .csv file. To import a virtual bushing; the bushing coordinates, linear and rotational stiffness along all the three axis, and a coordinate system are required. The bushings are mapped based on the specified diameter. It is connected to two parts that fall within the specified diameter from the input coordinates.
Contour plots in local coordinate systemAll contour plots for structural and modal analysis can now be plotted along a local coordinate system. The local coordinate system can be Cartesian or cylindrical. The Set Output Coordinate System settings can be accessed from the legend. Pick info and Result graph outputs results based on the output coordinate system.
Improved solution settingsSolution settings have been re-factored to have two higher level adaptations called Global and Global + Local. Global adaptation is best for general load path prediction, modes and/or thermal analysis.
- Uses three adaptive passes and Adapt to thin solids
- Refinement level is set to Standard
- Only uses global adaption
Global+Local is best for stress calculation with more precision.
- Uses four adaptive passes
- Adapt to features
- Adapt to thin solids
- Automatically creates local group for the parts and segregates based on its relative volume
- Can be used for both global and local adaptations
- Refinement level is set to Standard
In addition to higher level adaptations, there is a new option available under custom solution settings that automatically creates local groups for the parts and segregates them based in its relative volume.
New approach for bolt tighteningBolt/nut tightening is now performed as active load. The target axial force is now precisely achieved.
Fatigue based on structural nonlinearFatigue analysis can now reference structural nonlinear analysis with separating contact. This is supported in addition to structural linear analysis.
Import remote loads with custom coordinate systemImported remote loads from a .csv can now reference a custom coordinate system in addition to the global coordinate system.
Product editionsProduct editions can now be selected from Settings > License. Product editions including Basic, Standard and Advanced are available. In addition to them, a Trial edition is also available that gives access to the Standard version for 30 days.
Re-factor material databaseMaterial database has been re-factored such that materials can be created based on specific physics such as mechanical/thermal. Mechanical properties are not required to be input to just run thermal analysis and conversely.
Re-factor spot weldsSpot welds have been re-factored to represent 2T/3T/4T welds appropriately. All the welds are not converted into 2T welds anymore but are rather represented as created in the Project Tree. When spot welds are imported from a .csv, the order of spot welds is also maintained. In addition to spot weld re-factor, the number of spot welds are also captured in the Project Tree Spot Welds info.
Re-factor boundary conditions for dynamic analysisYou can now apply multiple boundary conditions to the same geometric entity for dynamic analysis. This allows applying different load functions along different directions. Applying multiple load functions to the same boundary condition has now been disabled.
Save RMS response to project fileRMS von-Mises stresses are also now saved to the project file after evaluation.
Solving linked analysisAll linked analysis are solved automatically without using the solve manager. This applies to all linked analysis including structural, buckling, modal prestressed, dynamics, thermal stress and squeak and rattle.
Updated CAD import formatsThe list of supported CAD formats are updated.
SimSolid is a game-changing simulation technology for designers and design engineers. Its just the perfect tool to kick-start any design process. This software completely eliminates the need for any geometry simplifications and meshing enabling you to get most out of your structural analysis in the least possible time. With SimSolid, model preparation is done within minutes. Even complex parts and large assemblies can be analysed with ease. SimSolid is tolerant of imprecise geometry and is just the right thing to accelerate your design process. In addition, this structural analysis solution is fast, really very fast. Highly accurate simulation results are obtained within minutes! Multiple design scenarios can be quickly analyzed and compared. And, accuracy can be specified on an individual part level allowing a rapid drill down to any level of detail that is required. This intro to Altair SimSolid video discusses some of the key benefits of SimSolid. It also contains a detailed demo and product workflow. After viewing this video, you should be able to run your first simulation within the tool. Altair transforms design and decision making by applying simulation, machine learning and optimization throughout product lifecycles. Our broad portfolio of simulation technology and patented units-based software licensing model enable Simulation-Driven Innovation for our customers. With more than 2,000 employees, Altair is headquartered in Troy, Michigan, USA and operates 71 offices throughout 24 countries. Altair serves more than 5,000 customers across broad industry segments. Product: Altair SimSolidVersion: 2023Supported Architectures: x64Website Home Page : www.altair.comLanguage: englishSystem Requirements: PC *Size: 548.6 mb购买后，将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容，购买后显示
微博帐号登录