OpenRoads Designer CONNECT Edition 2022 Release 3 | 8.5 Gb
The OpenBuildings development team is pleased to announce the availability of OpenRoads Designer CONNECT Edition 2022 R3 Update 12 (10.12.02.004) is a comprehensive and fully functioned detailed design applicationfor surveying, drainage, utilities, and roadway design that supersedes allcapabilities previously delivered through InRoads, GEOPAK, MX, and PowerCivil. OpenRoads Designer 2022 R3 Update 12 (10.12.02.004) what's newBellow provides a list of new features in Bentley OpenSite, OpenRoads, and OpenRail Designer CONNECT Edition products, also referred to as OpenX Designer products. 2022 Release 3 includes no enhancements, only defect fixes. OpenRoads Designer 2022 Release 2 Update 12 (10.12.01.059) release notes This section provides a list of new features in Bentley OpenSite, OpenRoads, and OpenRail Designer CONNECT Edition products, also referred to as OpenX Designer products. Features that are only available in specific products are appropriately noted as such.
The following summarizes the new features and fixes in 2022 Release 2.
General Enhancements
- Update of Power Platform to Edition (10.17.2.454).
- Subscription Entitlement Service (formerly CONNECT Licensing) is utilized. For more information: Subscription Entitlement Service .
- This version uses OpenFlows SewerGEMS version 10.04.00.157. More information here: What's New in SewerGEMS, CivilStorm, SewerCAD, and StormCAD CONNECT Edition Update 4 (version 10.04.00.158) - OpenFlows | Water Infrastructure Wiki - OpenFlows | Water Infrastructure - Bentley Communities
- Includes Bentley LumenRT Designer CONNECT Edition Update 14.
- Includes Bentley Descartes CONNECT Edition ( 10.17.2.61 ).
- Update of gINT Civil Tools CONNECT Edition (V10.07.01.01).
- Support for following ProjectWise Connect Edition (V10.00.03.453).
- Includes Bentley Generative Components CONNECT Edition (V10.17.2.16).
- With continued support for side-by-side installations of major versions, 2022 Release 2 can be installed side-by-side with previous major versions.
- Added a Technology Preview that allows for the importing of data into a DGN directly from an ArcGIS database using the key-in: "mdl load Bentley.ArcGIS.dll;featureservice import"
- Added a new Export SHP tool, also a Technology Preview, which allows for the exporting of data directly to a Shapefile.
- For workspace changes please see \Configuration\Organization-Civil\Workspace Updates - 2022 Release 1.pdf included with the delivered workspace.
Geometry Enhancements
- Horizontal regression tools, previously available only in OpenRail, are now available in OpenRoads.
- Added compass rule adjustments to Geometry Builder tool.
- Added the ability in Geometry Editor to check geometry integrity and show any error locations with a graphical symbol.
- Added the ability in Geometry Editor to access the Check Integrity reports directly from the dialog.
- Added the ability in Geometry Editor to save XML files to help manage geometry changes.
- Added a new Point Filter tool to allow for the filtering of both survey and geometry points based on properties such a Name, Feature Code, 2D/3D, etc.
- Enhanced the Profile from Surface command to allow for an "interval" sampling option.
- Exposed the Hand parameter for Clothoid and Arc in the properties dialog.
Terrain Enhancements
- Added a new Analyze Line of Sight tool
- Enhanced Edit Terrain functionality so that the de-activation of the terrain prior to use is no longer required.
- Improved the ability to delete internal triangles.
- Terrain edits are now remembered and will not be lost if the terrain is re-processed.
Modeling Enhancements
- New Create 3D by Drape Element Tool that works on both civil and non-civil elements.
- Enhanced Civil Cells to allow for the propagation of design standards during placement.
- Added a prompt to the Quantity by Named Boundaries tool that gives users more information when enabling the creation of clipped graphics.
Item Types Enhancements
- Added additional item types for Corridors and Surface Templates
Drainage and Utilities Enhancements
- The Place Nodes command has been extended so that it can now place inlets according to spread criteria
- The required sump depth can now be automatically applied to nodes when conduits are placed
- Flow arrows can now be annotated on conduits in plan and profile
- Support for the TR-55 method of calculating Time of Concentration has been added such that catchments which have been automatically delineated can now use their flow path to define hydraulic lengths and slopes for each required flow regime
- Channel elements are now better represented in the 3D model. Previously, a trapezoidal shape was used. Now, a mesh is used, which morphs between the start and end nodes
- The properties for Utility nodes now include information on the connected links. Up to eight incoming and eight outgoing links are supported.
- You can now delineate a catchment to a point, as well as to an inlet
- The Elevation (Rim) value has been added to the Drainage and Utilities category in the Civil properties
- The units used for the conduit slope value in the Drainage and Utilities category in the Civil properties can now be set in the design file settings
- The Time Series Control Data dialog is now available. This can be used to vary how some controls operate over time, when using the SWMM Solver
OpenRoads Designer is an extremely versatile civil design application that is used for all types and sizes of civil projects around the world. The application addresses a wide variety of complex tasks such as interchange design, roundabout design, earthworks, surveying, sanitary and stormwater network design, subsurface utilities, and production of construction staking reports. Traditional 2D methods are manual and tedious, full of communication and data gaps, leaving you frustrated, exhausted, and with a project that costs you accuracy, time, and money. From survey through plan production and construction documentation, OpenRoads Designer is the one application you need to meet project requirements on time, every time, regardless of change. OpenRoads makes collaborating on 2D and 3D models easier and more efficient than ever. From team-level, work-in-progress collaboration to project-level, multidiscipline coordination, project managers, reviewers, site workers, and inspectors can view designs, perform virtual walkthroughs, query model information, and analyze embedded property data. You can automate the production of high-quality drawings, including multidiscipline documentation sets, which are consistent across the entire project. Get a live view of the project in sheet orientation. As the design changes, so will the sheets. Make edits directly in the design model and the application will update the sheets. OpenRoads is all you need for geometrics, survey, drainage, utilities, quantity takeoff, cut/fill, site grading, lane configurations, and mobility. Ensure visibility into overall project performance with design-time analytics to achieve optimized design outcomes for a wide variety of analysis such as drainage, terrain, safety, grading, site visibility, and more. Roadway designers and engineers require software that seamlessly collaborates across disciplines, addresses growing industry demands, and includes automation to remove tedious manual work. Whether you need to produce traditional 2D deliverables, advance to 3D modeling, support digital transformation, or all the above, OpenRoads is the choice for road design. Even as the transportation industry is moving towards the creation of 3D models, the need for a variety of deliverables continues to be part of the project workflow. With OpenRoads, you can create whatever deliverables you might need. Experience your designs in real time with constraint-driven templates, a context sensitive intuitive interface, and dynamic 3D modeling. Visualize the design at any time and on demand within the modeling workflow. No translations, software, or special workflow process is needed. Whether it is 2D or 3D, plans or models, digital or paper, OpenRoads is designed to allow you to work in all these arenas simultaneously, leveraging information from one to help populate the other. Our 3D models can be leveraged for 4D scheduling and 5D cost estimation, bringing your design to constructed fruition, on time and on budget. OpenRoads Designer Bentley Systems is a software development company that supports the professional needs of those responsible for creating and managing the world’s infrastructure. Product: OpenRoads DesignerVersion: CONNECT Edition 2022 R3 Update 12 (10.12.02.004)Supported Architectures: x64Website Home Page : www.bentley.comLanguages Supported: englishSystem Requirements: Windows *Size: 7.5 Gb * System Requirements:
购买后，将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容，购买后显示
微博帐号登录