[行业软件]DownStream Products 2022 (14.6.1869) [复制链接]

The software developer DownStream Technologies, LLC is pleased to announce the availability of CAM350/DFMStream 14.6 (1869) & BluePrint-PCB 6.6 (1864). The latest update focuses on getting the job done faster through a number of defect fixes and time saving enhancements.

DownStream CAM350 14.6 Build 1869 Release Notes - Date: 6/8/2022
CAM350/DFMStream 14.6 is a major update to CAM350 14.6. This release includes a new Visual Basic Application Programming Interface with Record and Playback capabilities, new DFM Analysis checks for Rigid-Flex designs and enhanced support for Rigid-Flex Layer Types, Net Bridge support, IPC2581 Revision C support, and OpenGL Graphics Acceleration.

CAM350/DFMStream 14.6 build 1864 is an update release and includes defect fixes and enhancements.


CAM350 14.6 Build 1864 Issues Resolved


70421 CAM350 Japanese version – DFM exception
70385 3D display is incorrect when board has mill paths that cut and are outside the board outline
70310 File Auto Import exception after these steps
70309 Macro – problem recording execution of stream
70308 Macro – problem recording import of stream
70238,69985 ODB++ import - Blind and buried hole types and not set after import of this file
70219 Mounting hole padstack has incorrect via hole type and plated status
70203 Stream Paste Mask check – paste bottom generic layer setting does not work
70179 Test points and probes not being displayed
70174 VB Automation – Enhancement to Delete a Stream in the Streams Editor
70130 Import – Via names incorrect
70121 Improvement to the display of 3D DFM error markers
70109 Design Compare static text labels are missing from dialog
70106 ODB++ export – Board attribute for thickness not passed to MiscAttrlist file
70081 Allegro cross-probing does not work
70042 Exception running DFM Streams on this file
70012 PADS ASCII import – drill layers not associated with layer sets
70011 VB Automation – Enhancement to be able to record/playback user actions in Report Streams Results dialog
70000 ODB++ import – Exception on wheel dcodes defined by hole symbols
69964 Panel Editor – Gerber to Mill exception on this file
69935 Auto backup failure
69923 Parts disappear in list on selection
69907 ODB++ import – does not read LASER via type
69883 Automation API – support for Draw to Raster
69827,70195 Macro – Setting Origins records, but does not playback successfully
69826 Panel Origin is not being displayed
69821 Draw to flash exception on this file
69788 Automation API – Exception when playing back this script
69714 Text Lost on File Save
69713,62733 Draw to Flash interactive failure
69575 OpenGL – Mill arcs not being displayed correctly
69211,69965 Cannot read Gerber X3 file
68533 Gerber import – pad incorrect shape
68366 Zuken IPC2581 Rev B 2019 differences from later versions (2021, 2020) concerning bottom mounted part mirroring
67278 Export PDF – Layer thickness mm is incorrect
66625 DXF being displayed incorrectly after file load
66025 DXF import exception on this file
61378 Design Compare complains about panelized data
69928 Legacy Basic macro net compare report incomplete
69746 Barco import crash
69723 3D representation is incorrect after flip panel creation
69697 Failure on IPC2581 import for Assembly function mode
69690 World View does not keep entire board outline in view for this design
69689 DRC should be enabled in the RE bundle
69687 Drill to drill check reports false errors
69678 Failure running design compare for this design
69674 Import DXF fails for this dxf file
69648 Move circles from 1 layer to another failure
69589 File Export Netlist IPC D356 A – file incorrect
69587 ODB++ import – flatten panel – steps are dropped
69498 Mill path properties missing group select
69434 CAM350 OGL issue - Panel overwrite in BluePrint incorrect when board image flipped
69269 VB Script Record – File Import ODB++ Advanced Option not recorded
69171 Support for Chinese and Japanese languages
67391 Padstacks are offset after ODB++ import for this design
67294 Assembly drawing intelligent outlines not displayed for rigid-flex design
61783 Mill tab failure for this design
DownStream BluePrint 6.6 Build 1855 Release Notes - Date: 6/8/2022
BluePrint 6.6 is a major update. It includes support for OpenGL hardware acceleration, panel data translation to CAM350, Net Bridge support and expanded Rigid-Flex Layer type support.

BluePrint 6.6 build 1864 is an update release which includes customer defect fixes and enhancements.


BluePrint 6.6 build 1864 Issues Resolved


70507 File Open of DPD results in lost Drill Symbols (“?”) for this DPD. Cause is file Import of IPC2581 design with “Conductive Coating” layer type.
70497 Zuken IPC-2581 import – Bottom components not displayed in bottom views
70326 Automation API – ShapeDetail (LayerStackup) SetX coord does not work
70314 Automation API – Enhancement to add read only extent properties to the Drawing Element object
70301 ODB++ import issue when design has composite layers can cause bad memory pointer
70245 BluePrint cannot open this DPD file
70222 Octagonal shaped pads rotated incorrectly
70173 Part with thousands of line segments cause BluePrint to crash during highlighting and selection
70130 Regression in Drill Table via names
70113 BluePrint is recognizing an Autosave file even after it has exited successfully.
70110 BluePrint crash when user places a dimension that stretches to an adjacent sheet
70103 Performance issue with this design
70087,64442 BluePrint Ref Des generation – results incorrect when both “Follow component orientation” and “Right Readable” enabled
70088 BluePrint crashes on ECO of IPC2581 design with net shorts
70079 Automation API – enhancement to add method to rebuild OpenGL
69993 ECO regression where the re-import of this CAD data incorrectly displays diagonal lines in component outlines
69980 Menu customization is not being applied correctly on import of bps file for this document
69905 Added command line switch to disable 3D model building in BluePrint
69700,68750 Performance improvement for File-Open operations over network using mapped drive
69602 “Add dual sided parts” in PCB View does not turn on components with only opposite side graphics
69434 CAM350 Panel overwrite - incorrect when board image flipped using OGL in CAM350
69197 Enhancement to format “Lines” in PCB data as “hollow” or with a line style (as you can routes, pins and copper)
67391 Some of the Backdrills are missing in backdrill stackup for this design
Enh Japanese language support installation


DownStream’s solutions are the defacto standard for engineering professionals to post process PCB designs. Our tools help to create and distribute all the deliverables required for a complete PCB manufacturing and assembly release package.

CAM350 is the industry de facto standard for verification, optimization and output generation to efficiently and effectively drive PCB fabrication and part of the truly integrated manufacturing data preparation solution from DownStream Technologies.

Today’s complex PCB designs require comprehensive verification before they are transferred to the PCB fabricator to ensure a successful and timely manufacture of bare boards. Problems arising during PCB fabrication can drastically impact product schedules, result in costly design re-spins, and require modifications to the design that might compromise the design’s integrity and intent. Inspecting, preparing and validating the PCB design prior to release to manufacturing will result in a significant increase in efficiency, less risk of design re-spin, and, most importantly, successful electronic products, built faster, at less cost.

3D visualization and documentation of manufacturing data helps to minimize manufacturing defects and delays in production. DFMStream is a comprehensive, yet easy-to-use tool suite designed to help engineers and designers analyze, verify and optimize a PCB design for successful manufacturing. It checks design and manufacturing rules on PCB design databases, Gerber and NC data any time during the PCB design cycle. DFMStream also fosters collaboration between engineer/designer and fabricator.

BluePrint-PCB works your PCB CAD system and/or CAM350 to help you quickly produce comprehensive electronic drawings to drive PCB fabrication, assembly and inspection processes.

DFMStream Webinar CAM350 & DFMStream Version 14.x







This video discusses the reasons for using a third party tool prior to releasing a design for manufacturing. This video features the new versions of DFMStream and CAM350. 3D, Stackup Visualization, enhanced GUI; are among the new features discussed.
DownStream Technologies, LLC is a software and services company focused on helping high-tech engineering organizations optimize and automate the PCB Release Process. We deliver a truly integrated manufacturing data preparation platform. Our solutions allow engineering and manufacturing teams to work together to transition Printed Circuit Boards (PCB) designs into successful, physical PCBs, faster and and without compromise.

Product: DownStream Products
Version: 2022 (14.6.1864)
Supported Architectures: x64
Website Home Page : www.downstreamtech.com
Languages Supported: english
System Requirements: Windows *
Size: 1.7 Gb


* System Requirements:

感谢楼主的分享。

谢谢分享。

      

谢谢分享。