[行业软件]Gowin EDA (FPGA Designer) 1.9.11.01 [复制链接]

            

正需要,感谢楼主

New Functions
- IPs added: MJPEG Decoder, SerDes RoraLink 8B10B, MULTACC
- Supports GVIO
- Configuration option "VCC" added in IDE interface
- IDE supports third-party editor navigation and jump function
- tcl command open_project added
- For GW1N-2 devices, primitive TLVDS_OEN_BK added and read back supported when MIPI OBUF configured in LP mode
- GW5A(T)-60 and GW5A(N)(R)T-15 devices support Slew Rate set

Gowin EDA

VCC" added in IDE interface
- IDE supports third-party editor navigation and jump function
- tcl command open_project added
- For GW1N-2 devices, primitive TLVDS_OEN_BK added and read back supported when MIPI OBUF configured in LP mode
- GW5A(T)-60 and GW5A(N)(R)T-15 devices support Slew Rate setting
- Programmer adds "GoConfig IP Mode" function to support JTAG low-to-high speed debugging for LittleBee Family devices
- Programmer adds the function to generate SVF files through "exFlash Erase, Program thru GAO-Bridge 5A" and "exFlash Erase, Program, Verify thru GAO-Bridge 5A"
- "Analyzer viewer" interface added under the Tools menu in Programmer to be used to determine the current status of the device based on status codes
- The command-line version of Programmer adds "Embedded Flash Background Mode" function, which supports GW1N(R)-9C, GW1N(R)-9, GW1NRF-4B, GW1N(R)-4B, GW1N(R)-4D, GW1N-4C, GW1NS(R)-4, GW1NZ-1(C) devices
Updated
- IPs updated: MULTACC, DLLDLY, DVI RX, DVI TX, HyperRAM Memory Interface external, SPI Nor Flash Interface(With Internal Flash), MIPI_DPHY, FP Sqrt, SerDes USB 3.0 PHY, UHS PSRAM Memory InterfaceV2.0, FOC Current Loop Control Light, XCORR, EDP Decoder, EDP Encoder, EDP RX Desteer, JESD204B
- The Bank Vccio for MIPI Output updated to1.8/2.5/3.3
- True LVDS PULL MODE for 22nm devices updated to support NONE/UP/DOWN/KEEPER settings

下载学习学习

    

1234567890