OMRON CX-ONE 4.6| 886.5 mb
The CX-One development team is pleased to announce the availability of update (2021.04) for CX-One 4.60 is a comprehensive software package that integrates PLC Programming Software with Support Software for setting up Networks, Programmable Terminals, Servo Systems, Inverters, and Temperature Controllers. What's new in OMRON CX-ONE 4.60 [Support of New Type]
*Supported the following new models.
CP2E-E[][]DR-A, CP2E-S[][]D[]-[], CP2E-N[][]D[]-[]
[Improved functions]
* Changed the default PLC.
. When CX-One is installed: CJ1M-CPU11 => CJ2M-CPU11
. When CX-One Lite is installed: CP1L-M => CP2E-S
* Solved the problem that CX-Programmer terminated abnormally or became inoperable when a project with a long project name or a long PLC name was loaded.
* Solved the problem that a fatal error occurred on the PLC after the project was downloaded, becauseDR0+,IR00 that was specified for instruction’s parameter was not detected in error check.
* Solved the problem that timer/counter numbers were determined incorrectly as duplicated with CIO address when the CIO address was specified as automatic allocation area.
* Solved the problem that an error might not be detected in program check even though input condition of the FB instance was not correct.
* Solved the problem that CX-Programmer might terminate abnormally, when a program that included FB instance was uploaded from the PLC.
* Solved the problem that the UM size displayed in the FB Memory view of CP1 might be incorrect when there is an FB definition and no FB instance.
* Solved the problem that an error occurs in the program check for a program with the maximum display capacity in the Memory view, when interrupt tasks and FB definitions are used simultaneously in a PLC with an area for FB only.
* Solved the problem that program errors cannot be detected if an array of variable type index is specified in the DIFU/DIFD instruction operands in the FB ladder.
* Solved the problem that a fatal error might occur in the PLC if a structure BOOL type member is used for the IF statement condition for the FBST program in CJ2H/CJ2M.
* Solved the problem that transferring CP1E programs to CX-Simulator might fail when the programs include interruption tasks.
* Solved the problem that no error is detected in program check even when an array variable without address assignment is used in a ST program/ST action/ST transition.
* Solved the problem in Ver.9.72 that arithmetic expressions cannot be used as the index of array variables in the ST program.
* Solved the problem that data could not be transferred to the comment memory immediately after clearing all memory.
CX-Simulator Ver.2.01
[Support of New Type]
* Supported the following new models.
CP2E-E[][]DR-A, CP2E-S[][]D[]-[], CP2E-N[][]D[]-[]
CX-Integrator Ver.2.67
[Support of New Type]
* Supported the following new models.
CP2E-N[][]D[]-[]
[Improved functions]
* Solved the problem that CX-Integrator might terminate abnormally when device parameters of the EJ1N-HFUB-DRT are copied.
CX-DriveVer.3.00
[Support of New Type]
* Supported the new inverter 3G3RX2-series
CX-Protocol Ver.2.01
[Improved functions]
* Solved the problem that memory leak might occur when the project file could not be loaded.
CX-Thermo Ver.4.69
[Support of New Type]
* Supports E5DC Push-In type.
Network Configurator Ver.3.68
[Support of New Type]
* Supported the K6PM series Control Panel Monitoring Device.
* Supported the FHV7 series Smart Camera.
* Supported the V430-F series Auto Focus Multi Code Reader.
CX-ConfiguratorFDTVer.2.53
[Support of New Type]
* Supported the E2E-NEXT(IO-Link embedded) series proximity sensors.
NX-IO Configurator Ver.1.21
[Support of New Type]
* Supported the simple setting function for IO-Link master (NX-ILM400).
* Supported NXーseries Temperature Control Unit (NX-TC) Ver1.2.
Switch Box Utility Ver.1.70
[Support of New Type]
* Supported the following new models.
CP2E-E[][]DR-A, CP2E-S[][]D[]-[], CP2E-N[][]D[]-[].
Common Components of CX-One and Sysmac Studio
[Support of New Type]
* Supported the following new models.
CP2E-E[][]DR-A, CP2E-S[][]D[]-[], CP2E-N[][]D[]-[].
* It is now possible to install IODD files (standard profile of IO-Link device) of Omron’s IO-Link devices.
* It is now possible to install IODD files ofIntelligent tap (accessory for F3SG-SR/PG series Safety Light Curtain)
* It is now possible to install IODD files ofProximity sensors (E2EW series)
[Improved functions]
[PLC Tools]
* Improved to prevent memory leak when the I/O table component terminates.
About OMRON CX-ONE. The CX-One software suite allows users to build, configure, and program a host of devices such as PLCs, HMIs, motion-control systems and networks using just one software package with one installation and license number. This greatly reduces the hassle of software maintenance and management at both the End-User and OEM level. About Omron Automation. Omron Automation is an industrial automation partner that creates, sells and services fully integrated automation solutions that include robotics, sensing, motion, logic, safety, and more. Established in 1933 and currently headed by President Yoshihito Yamada, Omron’s 36,000 employees help businesses solve problems with creativity in more than 110 countries. Product: OMRON CX-ONEVersion: 4.60 (2021.04)Supported Architectures: x85 or x64Website Home Page : https://automation.omron.com/Languages Supported: multilanguageSystem Requirements: PC *Size: 3.0 Gb 本部分内容设定了隐藏,需要回复后才能看到