Mentor Graphics FloEFD 2019.4 | 8.6 Gb
西门子公司Mentor宣布推出其屡获殊荣的前载FloEFD计算流体动力学（CFD）产品的最新版本，该产品具有几何处理，物理和结果可视化的新功能。 关于Mentor Graphics FloEFD。 FloEFD是一个全功能的3D计算流体动力学分析解决方案，内置于主要的MCAD系统，如Creo，CATIA V5，Siemens NX，Solid Edge和SolidWorks。它与Inventor紧密集成。 作为屡获殊荣的前载CFD解决方案，FloEFD使用户能够尽早将CFD仿真转移到设计过程中，以帮助工程师检查趋势并消除不太理想的设计选项。快速学习和易于使用，FloEFD消除了老式CFD软件的工作流程复杂性和网格化开销。 - FloEFD Standalone FloEFD是最快，最有效的计算流体动力学分析工具，与所有主要CAD工作流程（包括Inventor和SolidEdge）紧密集成。它使工程师能够直接处理他们的CAD模型，以准备和评估他们的并发CFD模拟。此外，与FloMASTER的独特1D-3D CFD耦合是业界首创，提供1D和3D软件技术的紧密耦合，设计为与集成源代码一起原生工作。- 用于PTC Creo的FloEFDPTC Creo的FloEFD是最流行的计算流体动力学（CFD）分析工具，它真正嵌入到Pro / ENGINEER和Creo中。它使设计工程师能够通过早期将模拟移动到设计过程来预先加载CFD，从而更加经济高效地识别和修复问题并提高x2到x40的生产率。- 用于CATIA V5的FloEFD用于CATIA V5的FloEFD是唯一一种真正嵌入CATIA V5的计算流体动力学（CFD）分析工具。它使设计工程师能够通过早期将模拟移动到设计过程来预先加载CFD，从而更加经济高效地识别和修复问题并提高x2到x40的生产率。- 用于Solid Edge的FloEFDFloEFD for Solid Edge是唯一功能强大的计算流体动力学（CFD）分析工具，完全嵌入到Solid Edge中。它使设计工程师能够通过早期将模拟移动到设计过程来预先加载CFD，从而更加经济高效地识别和修复问题并提高x2到x40的生产率。- 西门子NX的FloEFD 西门子NX的FloEFD是西门子NX中嵌入的功能强大的计算流体动力学（CFD）分析工具。它使设计工程师能够通过早期将模拟移动到设计过程来预先加载CFD，从而更加经济高效地识别和修复问题并提高x2到x40的生产率。 Mentor, a Siemens business, is pleased to announce the availability of FloEFD 2019.4 is a powerful computational fluid dynamics (CFD) analysis tool that is embedded into Siemens NX. This solution enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems and enhance productivity by x2 to x40. Release Simcenter FloEFD Version 2019.4 - Date: January 2020 The following new features are available in this release. - Illuminance Near field and Far field plot.You can now display Illuminance (incoming radiant flux adjusted for the capability of human eye to see the light, i.e. intensity of visible light) plot in the near field (close to the light source) and Luminous Intensity versus angle far away from the light source (so that the source can be considered as point source).
- LED additional rays. You can now add additional rays for a radiated LED (a LED withradiation sourceautomatically enabled once you set LEDs radiation properties).
- Radiation absorption cut-off wavelength. You can now specify a radiation wavelength above which the material is considered to be opaque.
- Import Structure function. Structure function (RC ladder) from T3Ster (*.xCTM) can now be imported into Network Assembly.
- Via material selection. All vias in SmartPCB can be assigned with either dielectric or copper material orexcluded from the calculation.
- FMU support. Functional Mock-up Interface is now supported by FloEFD (version 2.0). FMU exportand FMU import allows to perform co-simulations of FloEFDwith various simulation toolssupporting FMI.
- Export forces. The new exportof forces makes it easierto interface FloEFD with Simcenter 3D Motion.
- Component Control filters. You can show hidden or duplicated components in the Component Controldialog.
- Plot MinMaxvaluesuse crop. Plot Min and Max values are now calculated taking into account the plot’s crop.
适用于CATIA V5的Siemens Simcenter FloEFD 2019.4.0西门子业务部门Mentor很高兴地宣布，FloEFD的可用性是唯一真正嵌入到CATIA V5中的计算流体动力学（CFD）分析工具。它使设计工程师能够通过将仿真提前进入设计过程来提前加载CFD，在此过程中，识别和解决问题并以x2到x40的效率提高成本效益。
发行Simcenter FloEFD版本2019.4-日期：2020年1月 此版本中提供了以下新功能。 -照度近场和远场图。您现在可以在近场（靠近光源）和发光图中显示照度（根据人眼看到光的能力调整的入射辐射通量，即可见光的强度）。强度与远离光源的角度的关系（因此可以将光源视为点光源）。
-LED附加光线。现在，您可以为辐射的LED添加其他光线（设置LED的辐射属性后，会自动启用具有辐射源的LED）。
-辐射吸收截止波长。现在，您可以指定一个辐射波长，在该波长之上，该材料被视为不透明的。
-导入结构功能。现在可以将T3Ster（* .xCTM）的结构功能（RC梯形图）导入到Network Assembly中。
-通过材料选择。SmartPCB中的所有通孔都可以分配电介质或铜材料，或者不包括在计算中。
-FMU支持。FloEFD（2.0版）现在支持功能性模型界面。FMU导出和FMU import允许与支持FMI的各种仿真工具一起执行FloEFD的协同仿真。
-出口部队。新的输出力使FloEFD与Simcenter 3D Motion的接口更加容易。
-组件控制过滤器。您可以在“组件控制”对话框中显示隐藏或重复的组件。
-绘制使用作物的MinMaxvalues。现在，将考虑地块的作物计算出地块的最小值和最大值。
发行Simcenter FloEFD版本2019.3 新功能列表；
PDML导入。PDML最初是FloTHERM格式，IC供应商经常使用该格式为用户提供IC封装仿真模型。现在可以将* .pdml格式的IC封装定义导入FloEFD（需要EDA Bridge许可证）。PDML格式包含有关几何形状，源和材料属性的信息。可以导入以下信息：
EDA桥。现在可以将PCB导入现有项目中。EDA Bridge将PCB添加到一个单独的组件中，该组件被添加到主装配体中，并且PCB定义作为从该组件链接的条件（从组件中添加）被添加。右键单击“从组件”树中的PCB组件文件夹，您可以轻松地将导入的PCB复制到同一项目。
参数。项目参数现在可以依赖于目标，时间，迭代和作为函数或表格的行程。您可以创建复杂的表和公式相关的边界条件。
方程式目标。公式目标现在可以取决于CAD参数。
所有真实气体的相变。现在，相变不仅适用于制冷剂，还适用于所有实际气体。
在稳态下平均。现在，可以在稳态分析中在用户定义的迭代间隔内对可视化参数进行平均。如果启用平均，其他参数将显示在列表中。
轨迹加速。现在，“形状上的图案”类型在定义之后立即显示轨迹。新的“球形”形状可以更轻松地定义起点。
绘制最小最大自动缩放比例。更改结果后，图的最小值和最大值可以自动更新。“ Plot Min Max”按钮可作为切换和更新Plot Min Max的操作，直到将其重置。
FLOEFD视图。FloEFD免费结果查看器的一些增强功能：
-为切割图添加了“法线图”视图。
-现在，剖面不仅可以裁剪几何，还可以裁剪图（应用于图选项）。
-旋转现在围绕视图中心旋转。
另存为。添加了视图模式的选择（线框，阴影，带阴影的阴影）。
结果摘要。在结果摘要中添加了湍流参数。
射线图。可以在计算之前定义射线图，并可以使用“批处理结果处理”进行处理。
表面参数。偏移选项已添加到“曲面”参数。
指向目标。通过坐标添加点时，可以设置目标的名称。
改进了远程数据管理。完成计算后，即使关闭了CAD，来自计算服务器的结果也会自动复制到客户端计算机。
使用Windows HPC Pack 2016调度程序进行远程计算。现在，您可以将各种参数传递给调度程序（不需要管理特权）：模板，优先级，节点和节点组，保持时间。
CATIA R29支持。现在支持CATIA V5-6 2019（R29）。
适用于Creo的Siemens Simcenter FloEFD 2019.4.0 西门子业务部门Mentor很高兴地宣布，FloEFD是真正嵌入PTC Creo的最流行的计算流体动力学（CFD）分析工具。它使设计工程师能够通过将仿真提前进入设计过程来提前加载CFD，在此过程中，识别和解决问题并以x2到x40的效率提高成本效益。 发行Simcenter FloEFD版本2019.4-日期：2020年1月 此版本中提供了以下新功能。 -照度近场和远场图。您现在可以在近场（靠近光源）和发光图中显示照度（根据人眼看到光的能力调整的入射辐射通量，即可见光的强度）。强度与远离光源的角度的关系（因此可以将光源视为点光源）。
-LED附加光线。现在，您可以为辐射的LED添加其他光线（设置LED的辐射属性后，会自动启用具有辐射源的LED）。
-辐射吸收截止波长。现在，您可以指定一个辐射波长，在该波长之上，该材料被视为不透明的。
-导入结构功能。现在可以将T3Ster（* .xCTM）的结构功能（RC梯形图）导入到Network Assembly中。
-通过材料选择。SmartPCB中的所有通孔都可以分配电介质或铜材料，或者不包括在计算中。
-FMU支持。FloEFD（2.0版）现在支持功能性模型界面。FMU导出和FMU import允许与支持FMI的各种仿真工具一起执行FloEFD的协同仿真。
-出口部队。新的输出力使FloEFD与Simcenter 3D Motion的接口更加容易。
-组件控制过滤器。您可以在“组件控制”对话框中显示隐藏或重复的组件。
-绘制使用作物的MinMaxvalues。现在，将考虑地块的作物计算出地块的最小值和最大值。
Release Simcenter FloEFD Version 2019.3
List of new features;
PDML Import. PDML is originally FloTHERM format which is often used by IC vendors to supply users with IC package simulation model. An IC package definition in *.pdml format can now be imported into FloEFD (requires EDA Bridge license). PDML format contains information about geometry, sources and material properties. The following information can be imported:
EDA Bridge. PCB can now be imported into an existing project. EDA Bridge adds PCB to a separate component which is added into main assembly and PCB definition is added as condition linked from this component (Add from Component). You can easily copy imported PCB to the same project with right-mouse click on PCB component folder in the From Component tree.
Parameters. Project Parameters can now be dependent on goals, time, iterations and travels as a function or table. You can create complex table and formula dependent boundary conditions.
Equation goal. Equation goal can now depend on CAD parameter.
Phase change for all real gases. Phase change is now available for all real gases not only refrigerants.
Averaging in steady-state. Visualized Parameters can now be averaged over user-defined interval of iterations in a steady-state analysis. If you enable averaging, additional parameters appear in the list.
Trajectory speed-up. The “Pattern on Shapes” type now displays trajectories immediately after definition. A new “Sphere” shape provides easier definition of starting points.
Plot Min Max auto scaling. A plot’s minimum and maximum values can be updated automatically when results are changed. The Plot Min Max buttons work as toggle and update plot Min Max until they are reset.
FLOEFD View. A few enhancements in FloEFD free results viewer:
- “Normal to Plot” view is added for cut plots.
- Section can now crop plots (Apply to plots option) not only the geometry.
- Rotating now rotates around the centre of the view.
Save As. Added selection of View mode (Wireframe, Shaded, Shaded with Edges).
Results summary. Added turbulence parameters into results summary.
Ray plot. Ray plot is available for definition before calculation and can be processed with Batch Results Processing.
Surface parameters. Offset option is added to Surface parameters.
Point goals. When added points by coordinates you can set the name of the goal.
Remote data management improved. After finishing calculation results from the calculation server are automatically copied to the client computer even if CAD was closed.
Remote calculation with Windows HPC Pack 2016 scheduler. You can now pass various arguments to the scheduler (no need administrative privileges): template, priority, nodes and node groups, hold time.
NX 13 Support. Support of Siemens NX 1847 and 1872 Series.
Customize Licenses Feature. Customize Features now lists modules rather than atomic license features. System administrators can now customize the license choice for multiple users using the CustomizeFeatures.exe routine. For details, refer to the “Selecting License Features to Use” in the Installation Guide.
MLS update. This version supports Mentor Standard Licensing (MSL) version 2019_3 which uses FlexNet™ 11.16.4. This may require updating the license server.
Problems Fixed in This Release dts0101386748 Crash at preparing stagein solver for the task with specified Membrane and switched off "Heat conduction in solids"optiondts0101342374 Periodic mesh isn’t generated [model specific]dts0101339484 Long time per iteration in case of perforated plate is specified in the task comparing to the case without perforated platedts0101382204 Misinterpreting names of Inlet and Outlet fans in Japanese versiondts0101301814 Too big total temperature variation in turbulent mixing layer for high Mach number solvercomparing to low compressible solverdts0101186578 Plotmaximum value definition in CutPlot is not recognized in the clonedproject and old max value from original project is shown FloEFD for Siemens NX is a powerful computational fluid dynamics (CFD) analysis tool that is embedded into Siemens NX. It enables design engineers to frontload CFD by moving simulation early into the design process where it is more cost effective to identify and fix problems. Extend the power of Siemens NX to optimize product performance and reliability for fluid flow and heat transfer effects. With its unique combination of intuitive interface, and fast as well as accurate technology, Simcenter FLOEFD for NX can be inserted into your current design process without any disruption, streamlining your workflow and improving productivity by 40x. The award-winning Simcenter FLOEFD for NX frontloads computational fluid dynamics (CFD) simulation where it is faster and more cost-effective to evaluate your ideas. Gain insight into the real-life behavior of a wide range of fluids in even the most complex geometries. Evaluate the digital twin with the help of what-if testing and assess the results with the help of numerical values, graphs, images and animations. Use the power of Simcenter FLOEFD for NX with its direct interface to HEEDS Design Space Exploration software to select the most optimal choice. When needed, Simcenter FLOEFD Flexx, enables you to access multiple CAD systems for simulation – useful for dealing with legacy data or using multiple CAD systems on the same project. With Simcenter FLOEFD for NX the power of CFD simulation is finally in your hands NX FloEFD is for CAD designer who are looking for Frontloading and accurate CFD analysis. ‘Frontloading’ refers to the practice of moving CFD simulation early into the design process where it can help engineers examine trends and eliminate less desirable options, as well as reduce overall simulation workflow time by as much as 75%. 关于Mentor Graphics。 Mentor是西门子业务部，是电子硬件和软件设计解决方案的全球领导者，为世界上最成功的电子，半导体和系统公司提供产品，咨询服务和屡获殊荣的支持。我们使公司能够更快，更经济地开发更好的电子产品。我们的创新产品有助于克服复杂的设计挑战。Mentor是Veloce，Questa，Tessent和Calibre平台的全芯片仿真，功能验证，设计测试和物理验证的技术领导者。 产品： Mentor Graphics FloEFD 版本： 2019.3支持的体系结构： x64 网站主页： www.mentor.com语言：多语言系统要求： PC / Linux 支持的操作系统： * 软件先决条件： ** 大小： 8.6 Gb
Siemens Simcenter FloEFD 2019.4.0 v4836 Standalone 本部分内容设定了隐藏，需要回复后才能看到
（Siemens Simcenter FloEFD ） 2019.4.0 v4836 for Siemens NX 本部分内容设定了隐藏，需要回复后才能看到
Siemens Simcenter FloEFD 2019.4.0 v4831 for CATIA V5 本部分内容设定了隐藏，需要回复后才能看到
Siemens Simcenter FloEFD 2019.4.0 v4831 for PTC Creo x64 本部分内容设定了隐藏，需要回复后才能看到
关于激活 1. Install FloEFD FEX2019.3 Win64. Do not install License Server! At setup clear the field for License Server port and name. 2. Copy folder "ProgramData" to C: with overwrite 3. Copy file "MGLS64.DLL" to <FloEFD FEX2019.3 program directory>\bin\lib (by default C:\Program Files\FloEFD\FloEFD FEX2019.3\bin\lib\ ) with overwrite 4. Run "mentor_local_licensing.reg" and confirm to add info into Windows Registry 5. REBOOT! 6. Enjoy Cracked by TeAM SolidSQUAD-SSQ
微博帐号登录