[行业软件]Autodesk Inventor Tolerance Analysis 2024 激活码 [复制链接]

The Autodesk products team is pleased to announce the availability of Tolerance Analysis 2024, is a CAD-embedded 1D analysis solution which reports the mechanical fit and performance of your design based on dimensional tolerances.

图片:1.png

Inventor公差分析是一种一维公差分析工具，可报告零件在单个线性方向（例如X）上的公差堆积。该分析使您可以基于累积零件公差来确定装配中的零件是否满足机械装配和性能要求。
Inventor公差分析支持最坏情况，一般统计和平方根均方根（RSS）分析方法。 RSS是统计分析方法的特例，在“统计”部分之后进行介绍。
Autodesk Inventor Tolerance Analysis2021功能概述
通过对3D模型中的几何尺寸和公差（GD＆T）进行分析，减少制造过程中的公差问题。
计算最坏情况，RSS和分析的统计结果。以Cpk，Sigma，DPMO或Yield报告统计结果的指标。
生成报告以将分析结果和成本控制工作传达给制造和质量工程师。

发明人公差分析功能
公差分析堆栈中包含的尺寸的图形界面
公差叠加分析
通过对3D模型中的几何尺寸和公差（GD＆T）进行分析，减少制造过程中的公差问题。

泵体模型公差分析面板的屏幕截图
先进的统计结果
计算最坏情况，RSS和分析的统计结果。 以Cpk，Sigma，DPMO或Yield报告统计结果的指标。

在生成报告之前要检查的分析结果的屏幕快照
报告生成
生成报告以将分析结果和成本控制工作传达给制造和质量工程师。
New enhancements in the Tolerance Analysis 2020.1 update - Date: July 21, 2019

The following enhancements are included in the Inventor Tolerance Analysis 2020.1 Update:

- Faces are now inferred from Insert constraints and they participate in an automatic constraint loop.
- Automatic constraint loop participants now include subassembly components.
- If a Mate constraint consumed in the constraint loop contains an offset value, the offset value is automatically added to the stackup.
Fixed Issues in 2020.1
- Most geometry editing operations are now disabled when the Tolerance Analysis environment is active because geometry edits can cause a crash. The preferred workflow is to exit the environment before making changes to the CAD model. (INVGEN-29588)
- Stackup data can be marked as invalid if two copies of an assembly are opened in the same session. (INVGEN-30304)
- Tolerance Analysis 2020.1 can be installed on Inventor 2019 RTM with no installation error. (INVGEN-28254)
- Preview boxes are no longer missing when creating tube and pipe run. (INVGEN-27525)

Inventor Tolerance Analysis is a CAD-embedded, 1D analysis solution that reports the mechanical fit and performance of designs based on dimensional tolerances. Stack-ups automatically capture the relationships defined in the assembly model – and for Model-Based Definition users, tolerance values can be edited directly inside the software to streamline the process between design and manufacturing.

With an in-canvas workflow that uses geometric dimensions and tolerances right on your model, analyze critical areas of your design to ensure they satisfy your objectives for manufacturing. Inventor Tolerance Analysis captures the necessary parts and mate relationships automatically to close the loop.

Autodesk Inventor Tolerance Analysis Overview

Autodesk helps people imagine, design and create a better world. Everyone—from design professionals, engineers and architects to digital artists, students and hobbyists—uses Autodesk software to unlock their creativity and solve important challenges.

Product: Autodesk Inventor Tolerance Analysis
Version: 2021
Supported Architectures: x64
Website Home Page : www.autodesk.com
Language: english
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 464.2 mb




关于激活

0.Unzip/Unrar Start sfx installer and wait for the installation to start
  or mount ISO

1.Install Autodesk Inventor Professional 2021

2.Use as Serial 666-69696969, 667-98989898, 400-45454545 066-66666666 ..
  or anything matching those templates

3.Use as Product Key 797M1

4.Finish the installation & restart Autodesk Product
  Choose Enter a Serial

ACTIVATION : We suggest blocking outgoing traffic (faster and easier to activate)

5.Before clicking on Activate
  You have 2 options :
   - a) Disable Your network Card, pull the network cable out or block with firewall
     (this is just to disable online checks) it will tell you that an internet Connection is Required
     simply click on close and click on activate again

OR
   - b) Click on Activate and it will do an online check, simply click
     on close and click on activate again.


Choose option a or b.

6. Select I have an activation code from Autodesk

7.Once at the activation screen:
  start XFORCE Keygen with administrator rights

8.Click on Mem Patch (you should see successfully patched)

9.Copy the request code into the keygen and press generate

10.Now copy the activation code back to the activation screen and click Next
  You have a fully registered autodesk product

  You may get this message while your outgoing traffic is blocked, or you are off internet
  Your online activation request has returned an error (800c0005) which is not allowing your request to be processed using our automated systems.
  just Click Close


NB: Make sure you are running the Keygen as administrator from your HDD and with UAC off on Windows 7/8/10
    You can apply updates before or after activation

百度网盘的地址都不好用，看看这个吧

这个可以做开挖？

谢谢分享，正在需要

谢谢分享，正需要