Autodesk Inventor Tolerance Analysis 2026 | 309.2 mb
The Autodesk products team is pleased to announce the availability of Tolerance Analysis 2025, is a CAD-embedded 1D analysis solution which reports the mechanical fit and performance of your design based on dimensional tolerances.
Inventor公差分析是一种一维公差分析工具,可报告零件在单个线性方向(例如X)上的公差堆积。该分析使您可以基于累积零件公差来确定装配中的零件是否满足机械装配和性能要求。
Inventor公差分析支持最坏情况,一般统计和平方根均方根(RSS)分析方法。 RSS是统计分析方法的特例,在“统计”部分之后进行介绍。
Autodesk Inventor Tolerance Analysis2021功能概述通过对3D模型中的几何尺寸和公差(GD&T)进行分析,减少制造过程中的公差问题。
计算最坏情况,RSS和分析的统计结果。以Cpk,Sigma,DPMO或Yield报告统计结果的指标。
生成报告以将分析结果和成本控制工作传达给制造和质量工程师。
发明人公差分析功能
公差分析堆栈中包含的尺寸的图形界面
公差叠加分析
通过对3D模型中的几何尺寸和公差(GD&T)进行分析,减少制造过程中的公差问题。
泵体模型公差分析面板的屏幕截图
先进的统计结果
计算最坏情况,RSS和分析的统计结果。 以Cpk,Sigma,DPMO或Yield报告统计结果的指标。
在生成报告之前要检查的分析结果的屏幕快照
报告生成
生成报告以将分析结果和成本控制工作传达给制造和质量工程师。
The following enhancements are included in the Inventor Tolerance Analysis 2020.1 Update: - Faces are now inferred from Insert constraints and they participate in an automatic constraint loop.- Automatic constraint loop participants now include subassembly components.- If a Mate constraint consumed in the constraint loop contains an offset value, the offset value is automatically added to the stackup.Fixed Issues in 2020.1- Most geometry editing operations are now disabled when the Tolerance Analysis environment is active because geometry edits can cause a crash. The preferred workflow is to exit the environment before making changes to the CAD model. (INVGEN-29588)- Stackup data can be marked as invalid if two copies of an assembly are opened in the same session. (INVGEN-30304)- Tolerance Analysis 2020.1 can be installed on Inventor 2019 RTM with no installation error. (INVGEN-28254)- Preview boxes are no longer missing when creating tube and pipe run. (INVGEN-27525) Inventor Tolerance Analysis is a CAD-embedded, 1D analysis solution that reports the mechanical fit and performance of designs based on dimensional tolerances. Stack-ups automatically capture the relationships defined in the assembly model – and for Model-Based Definition users, tolerance values can be edited directly inside the software to streamline the process between design and manufacturing. With an in-canvas workflow that uses geometric dimensions and tolerances right on your model, analyze critical areas of your design to ensure they satisfy your objectives for manufacturing. Inventor Tolerance Analysis captures the necessary parts and mate relationships automatically to close the loop. Autodesk Inventor Tolerance Analysis Overview Autodesk helps people imagine, design and create a better world. Everyone—from design professionals, engineers and architects to digital artists, students and hobbyists—uses Autodesk software to unlock their creativity and solve important challenges. Product: Autodesk Inventor Tolerance AnalysisVersion: 2026Supported Architectures: x64Website Home Page : www.autodesk.com Language: englishSystem Requirements: PC *Supported Operating Systems: *Software Prerequisites: *Size: 464.2 mb 购买后,将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容,购买后显示