论坛风格切换
正版合作和侵权请联系 sd173@foxmail.com
 
  • 帖子
  • 日志
  • 用户
  • 版块
  • 群组
帖子
购买邀请后未收到邀请联系sdbeta@qq.com
  • 8889阅读
  • 13回复

[行业软件]Geometric DFMPro 11.1.0.9961  or NX/SOLIDWORKS/ProE/WildFire/Creo 2024-02 [复制链接]

上一主题 下一主题
离线大神
 
发帖
*
今日发帖
最后登录
2024-05-20
只看楼主 倒序阅读 使用道具 楼主  发表于: 2020-02-11 11:38:39 , 编辑
Geometric DFMPro是用于软件开发的集成CAD设计,可帮助设计人员以最少的返工提供高质量的设计。DFMPro SOLIDWORKS可帮助设计人员在SOLIDWORKS环境中审查其构造和装配设计。该插件支持Creo,NX,SolidWorks和Geometric DFX等CAD软件。使用此插件,您可以首先检查设计中是否存在构建和装配问题,并且该插件会通过一系列规则(难以设计,昂贵或昂贵的区域)自动执行重复的设计过程。确定可能。
The HCLSoftware development team is pleased to announce the availability of HCL DFMPro 10.0.0 build 4521, an CAD integrated DFM software, is engineered to help designers check their designs for manufacturability and assembly and correct these problems early in the design stage.

The HCLSoftware development team is pleased to announce the availability of HCL DFMPro 10.5.0 (7451) is CAD integrated DFM software, is engineered to help designers check their designs for manufacturability and assembly and correct these problems early in the design stage.

Release Notes DFMPro for NX Version 10.5.0.7451



DFMPro Key Enhancements

NX 2306 Series Support

Added New Rule

Standard Sheet Thickness – Sheet Metal
The organization has a standard sheet thickness inventory. The design engineer should use the standard sheet thickness based on the material. Any non-standard sheet thickness leads to extra inventory and additional raw material costs.
Recommendations: Use Sheet thickness should be as per the value configured in the Rule Configuration table.


Minimum Wall Thickness – Additive Manufacturing
Based on the Additive Manufacturing sub-process, minimum wall thickness should be maintained for supported and non-supported walls. Thin walls are more likely to warp due to differential shrinkage during the cooling process. It bends before the resin can dry or cure. Extra support is required to hold it.
- Fusion Deposition Modeling (FDM) – Minimum Wall Thickness should be 0.8 mm for supported and non-supported walls.
- Stereolithography (SLA) - Minimum Wall Thickness should be 0.5 mm for supported and 1.0 mm for non-supported walls.
- Selective Laser Sintering (SLS) - Minimum Wall Thickness should be 0.7 mm for the supported wall.
Users can configure the manufacturing process like Fusion Deposition Modeling, Stereolithography, Selective Laser Sintering, and corresponding minimum wall thickness values for supported and non-supported walls.


Recommended Text Parameters – Additive Manufacturing
Text characters are small features in additive parts that convey additional information.
Example:
- Lettering
- Identification marks
- Important instruction, warning
- Legal and Regularity information
- Company logo, Symbols
Text characters are small features of an additive part and look much better if raised above the print's surface. Text height and width should be visible above the print's surface. If it is too small, then during printing, it might fuse with the model.Users can configure the manufacturing process like Fusion Deposition Modeling, Stereolithography, Selective Laser Sintering, and corresponding Recommended Text Parameters (text height and width).


Axial Misalignment Between Cored and Machined Hole - Milling
In the case of assembly machining, the pre-machined stock is used as a reference component, and machined features (drilled holes) are created on top of the stock. Rule checks the axial misalignment between cored hole (present in the cast link body) and the machined drill hole. Axial misalignment between cored and the machined hole creates an assembly issue.


Minimum Thread Relief Based on Thread Size - Drilling
While threading a blind hole, sufficient relief should be provided at the bottom of the threaded hole. Enough relief clearance allows for chamfer teeth of the tap; it will keep the tap tool from bottoming out in a hole and avoid any overcut issue while threading.


NX Check-Mate - DFMPro Settings

By default, the Update results in Check-Mate after import option is selected and is used to update the Checkmate results after successfully importing DFMPro results. To stop updating results in checkmate after import, deselect the checkbox.It is a global-level setting, and the admin can only define it. For non-admin users, this setting will be disabled.


User Inputs - Additive Manufacturing Sub Process

Users can select the sub-process option in the User Inputs group box only when Additive Manufacturing is selected as a Manufacturing Process to execute the analysis. There are four types of sub-processes: Default, FDM (Fusion Deposition Modeling), SLS (Selective Laser Sintering), and SLA (Stereolithography). DFMPro will analyze the Additive Manufacturing rules and specific sub-process rules based on the selection.


Manual Check Functionality

DFMPro Manual Check functionality will provide a framework to execute non-CAD geometryspecific checks, e.g., drawing-related checks, standard regularity checks, template-related checks, etc. After configuring those checks in standard “DFMPro_Manual_Check.xlsx,” all checks are available as a separate rule in the rule file. The designer can select those rules and perform DFMPro analysis. DFMPro will display a Manual Check dialog box during execution where the user can select the check that indicates the user has performed it.


Rule Manager - New User Interface

DFMPro has introduced a Rule Manager - New User Interface for a better user experience.




Visual Rule Modeler Enhancements

Additive Manufacturing
Users will be able to create additive manufacturing rules like Minimum Wall Thickness, Maximum Print Size, and Recommended Text parameters based on the following features and parameters:


Rule Summary and Rule Description
Describe rule application and importance in the form of a Summary. DFMPro will automatically fill in default information based on the Rule name. Users can modify it as required. A few special characters are not supported in the rule summary, like: ”, l, :, \\, ?, *
For example, if the rule name is Minimum Clearance Hole Diameter, DFMPro will fill the default summary as “Minimum Clearance Hole Diameter as per configured value in UI.”



Geometric DFMPro插件的功能:
  • 识别并突出显示CAD模型中的问题区域
  • 无需离开熟悉的CAD环境即可方便地修改计划
  • 使用IGES和STP等标准文件格式消除了耗时的文件传输
  • 易于与PLM,ERP和MES系统集成
  • 自动获取现有或新DFM规则所需的参数信息
  • 捕获和传播生产知识的可扩展框架
  • 生成三维和二维报告结果,以便于分析和解释
  • 以各种HTML,Excel和eDrawings®格式发布报告
  • 改善供应商,供应商和供应商之间的设计协作
  • 在SolidWork中执行常见制造过程的制造分析,例如塑料成型,钣金制造,机加工,铸造和装配操作
The Geometric development team is pleased to announce the availability of of DFMPro 7.0 for NX series. This software facilitates upstream manufacturability validation by identifying those areas of a design that are difficult, expensive, or impossible to manufacture and automates the iterative design review process for manufacturability issues.


DFMPro Key Enhancements

Supported NX Versions

- NX 1847 Series
- NX 1872 Series
- NX 1899 Series

Important Note:

- From DFMPro for NX 7.0 version, we have implemented the following changes:
. Support for the NX 1899 Series.
. Discontinued the support for the NX 9.0 and NX 10 versions.
. DFMPro License Server upgraded to a 64-bit application. The previous versions of DFMPro License Server was a 32-bit application.
- Add-ons on the DFMPro for NX –Cost and DFX Analytics are additional licensedcomponents that are not included with the standard DFMPro for NX version.

Added New Rules

Additive Manufacturing Module

Recommended Angular Tolerance
A designer should specify the allowable angular tolerance value, which can easilyachieve. The tight tolerance value will add extra cost and increase the operationaltime.

General

Recommended Dimensioning Method
A designer should specify PMI with correct references. Designers often tend to definethe PMI as a graphical representation point of view, which can only be read by thehuman eye. However, these representations cannot be consumed by machines or softwarebecause of inaccurate specification of references. If the designer specifies thePMI with correct references <Semantic PMI>, then it can be consumed by machines andsoftware. Semantic PMI will use for manufacturing automation like Computer-AidedManufacturing (CAM) and Coordinate Measuring Machines (CMMs).

Sand Casting Module

Draft Angle based on Height
Draft angle design is an essential factor when designing the Sand casting parts.In the Sand Casting process, the draft provides the part for pattern design. An appropriatedraft angle ensures the removal of the pattern without damaging the mold. No draftor undercuts can make with additional cores, which will add an extra cost.

The amount of draft angle will depend on the method of molding, drawing of the pattern,the material used as a pattern.
图片

安装指南
阅读每个副本的Crack文件夹中的Readme.txt文件。
对于NX
Download DFMPro 11.1.0.9961 for NX 2312 Series x64
Download DFMPro 10.0.0.4521 for NX 2212 Series x64
Download DFMPro 9.5.0.3189 for NX 1926-1953-1980-2007-2206 Series x64
Download DFMPro 8.0.0.9498 for NX 1926 & 1953 Series x64
适用于NX 1847和1872系列x64的DFMPro 7.0.0.7586
适用于NX 1847和1872系列x64的DFMPro 6.1.0.6061
适用于NX 12.0 x64的DFMPro 6.0.0.6043
适用于NX 11.0 x64的DFMPro 6.0.0.6043
适用于NX 9.0-10.0 x64的DFMPro_5.1.0.5471
适用于NX 8.0-8.5 x86的DFMPro_4.5.0.4475
适用于NX 8.0-8.5 x64的DFMPro_4.5.0.4475
用于WildFire
适用于WildFire 4-5 CreoElementsPro的DFMPro 4.2.1.3676
Creo参数
适用于Creo Parametric 4.0的DFMPro 5.2.1.5012
适用于Creo Parametric 3.0的DFMPro 5.2.1.5012
为Creo Parametric 1.0-2.0下载DFMPro_5.2.1.5012
用于SolidWorks
SolidWorks 2012-2018 x64的DFMPro_5.0.0.5016
此帖售价 99 电魂,已有 5 人购买 [记录] [购买]
购买后,将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容,购买后显示

关于激活

1. Install DFMPro v7.0.0.7586 for NX1847-1872-1899 Series Win64.
   At the end of setup refuse from License setup (select "None" > Finish )

2. Overwrite original <DFMPro for NX(x64) program folder>
   (by default C:\Program Files\HCLTech\DFMPro For NX(x64)) with cracked one

3. Run <DFMPro for NX(x64) program folder>\DFMProLicenseManager\DFMLicenseManager.exe

    On "License Setup" tab select

    "Select node locked (Standalone) license file"

    Browse to <DFMPro for NX(x64) program folde>\DFMProLicenseManager\gssl_SSQ.lic, click Open

    Click OK to finish license setup

4. Enjoy



Cracked by TeAM SolidSQUAD-SSQ















软件下载咨询 sdbeta@qq.com
 
离线caiguang

发帖
154
今日发帖
最后登录
2023-06-23
只看该作者 沙发  发表于: 2020-03-09 09:03:59
不错的宝贝啊
离线liujin200016

发帖
229
今日发帖
最后登录
2024-05-17
只看该作者 板凳  发表于: 2020-08-24 08:34:48


Geometric DFMPro 7.2.0 build 9035 or NX/SOLIDWORKS/ProE/WildFire/Creo 2020-02-10

离线wangjinhuei

发帖
33
今日发帖
最后登录
2023-12-11
只看该作者 地板  发表于: 2021-03-21 08:46:23
来学习学习大神的经验
离线aaron_102

发帖
1
今日发帖
最后登录
2022-05-30
只看该作者 地下室  发表于: 2022-05-27 16:26:11
Geometric DFMPro 7.2.0 build 9035 or NX/SOLIDWORKS/ProE/WildFire/Creo 2020-02-10

离线ganjun2001

发帖
3066
今日发帖
最后登录
2024-05-20
只看该作者 5 发表于: 2022-05-28 07:58:55
      
软件下载咨询 sdbeta@qq.com
 

发帖
4960
今日发帖
最后登录
2024-05-20
只看该作者 6 发表于: 2024-02-19 10:22:30
    
离线chen0228

发帖
122
今日发帖
最后登录
2024-05-20
只看该作者 7 发表于: 2024-02-19 16:26:31
      
离线chendenglin

发帖
2272
今日发帖
最后登录
2024-05-20
只看该作者 8 发表于: 2024-02-24 15:10:27
        
离线chendenglin

发帖
2272
今日发帖
最后登录
2024-05-20
只看该作者 9 发表于: 2024-02-24 15:37:28