Tekla Structural Design Suite 2024| 1.0 Gb
Trimble announced newer the introduction of 2024 versions of its Tekla software for constructible Building Information Modeling (BIM), structural engineering and steel fabrication management. Boasting an enhanced user experience, Tekla Structures 2024, Tekla Structural Designer 2024, Tekla Tedds 2024 and Tekla PowerFab 2024 let users collaborate with ease through enhanced communication for more integrated, connected workflows between all construction project stakeholders. Usability improvements make the Tekla suite of solutions ideal for experienced and new users alike, helping them to be on schedule and within budget of their projects. Collaboration is one of the deciding factors for the success of BIM. The 2024 Tekla versions include industry-standard communications improvements that allow users to deliver required documentation and model information efficiently, using a wider variety of supported industry formats. Connected workflows form the cornerstone of sustainable construction strategies to focus on increasing efficiency, optimizing resource allocation, reducing waste and supporting comprehensive maintenance across the full lifecycle of an asset- all anchored in constructible design. Tekla Structural Designer 2024The analysis capability of the structural design and analysis software Tekla Structural Designer 2024 has been enhanced with Staged Construction Analysis, which takes into account that there is a sequence in construction and loading. This fully automated process — that is quick and easy to use — can be applied to the design of both concrete and steel structures. Structural Engineers can now also use reference models from other disciplines such as architecture or MEP to check compatibility with their structural model. Tekla Tedds 2024The latest version of Tekla's software for structural engineering calculations builds upon the seamless integration of structural design information and documentation with Tekla Structures to improve collaborative design-to-detailing. Tekla Tedds 2024 offers updated libraries of predefined structural calculations and custom calculation capabilities for faster, more reliable structural element design, also in multi-material designs. It now also offers masonry design for US codes, steel angle design for European and US codes, and retaining basement wall analysis and design for European and US codes. Tekla Structural Design Suite is revolutionary software that gives engineers the power to analyze and design buildings efficiently and profitably. Fully automated and packed with many unique features for optimized concrete and steel design, Tekla Structural Design Suite helps engineering businesses to win more work and maximize profits, from the quick comparison of alternative design schemes to cost-effective change management and seamless BIM collaboration. Tekla Structural Designer (TSD) Tekla Structural Designer (TSD) software helps you to model, analyse and design a structure with high accuracy and within a short span of time. It has options to include steel, concrete, timber and composite type of materials in a single structure maintaining a good connection with all elements of different materials. The key feature of drafting options available in TSD is the extension lines which improves the accuracy of connections. TSD provides full freedom to the structural engineer in drafting and modeling by allowing us to import drawings and models from Autocad, STAAD, ETABS and other software at any stage of the project. The immense number of loading options available in TSD decreases the calculations and also improves the quality of results generated. It has codes of almost all the countries saved in it so that the wind load, snow load, seismic load, and their combinations are automatically calculated and applied. The analysis results produced are of utmost accuracy and result diagrams like momentdiagrams, force diagrams, and so on can be even animated. The quality of design results is incomparable and it matches with the most accurate manual design results using standard codes.
TSD generates reports in the format of a DPR which can be exported to any format for sharing like pdf, word and excel. TSD also provides us accurate drawings which can be directly forwarded to the construction site. It has everything in detail so that even a layman can understand all the arrangements. TSD also provides us the freedom to export the content to other drafting, analysis and design softwares at any stage. We can also share the project status with other project members whenever required. The results produced contain every detail from A to Z which helps us in further stages like detailing, DPR preparation, estimating and costing. TSD provides a structural engineer with maximum comfort in all stages of the project with better drafting options, modelling options, loading options, results and connectivity.
Tekla Tedds Tekla Tedds is easy to use software from Trimble that engineers can rely on for accurate calculations. With Tekla Tedds, engineers can streamline engineering design, avoid errors and present output professionally.
Because Tekla Tedds automates civil and structural calculations, it can improve both engineering productivity and quality: Working becomes more effective than with tedious, time-consuming manual calculations. The solution has a quality assured library of code compliant calculations that are easy to inspect. Users can flexibly create additional calculations and engaging design documents.
- In the face of challenging deadlines and demands, Tekla Tedds is a reliable solution that all engineers can trust to deliver the answers.
- Unlike spreadsheets, with Tekla Tedds you are in control because calculations are transparent for easy review and validation.
- For more professional documentation, desktop publishing features give engineers the power to quickly create and customize project documentation.
Tekla Tedds engineering library With hundreds of structural and civil engineering calculations readily available, the Tekla Tedds Engineering Library means faster, more reliable structural element design in all of your projects. Calculations are professionally designed to meet a range of international design codes, including:
- Eurocodes (Sweden, Norway, Finland, UK, Ireland, Singapore, Malaysia)
- American
- British Standards
- Australian
- Canadian. The report content includes results at:
.. A fixed number of positions as defined by the Positions Filter settings.
.. Additional “points of interest” wherever there is a maximum or minimum value for any of the 8 reported results which is larger than occurs at any station.
… The exception to this is torsion for which only abs max values are reported.
… The report is also amended - for all loading filters - to remove points with maximum deflections zero, which could previously be included.
. Hence there are potentially 15 positions in addition to the fixed positions. Therefore it is recommended to consider setting a minimum number of positions. E.g. as shown in the picture below you could set the minimum Positions Filter (beams) = 3 (gives four fixed positions of end points and two internal points at 1/3rd positions).
. These settings were used to produce the example below, in which it can be seen that:
.. All extreme values are given at the fixed points of 0m, 2.5m, 5m and 7.5m (shaded in blue).
.. Extreme values are also given at the points of interest of 4.059m and 6.025m (shaded in green) where the max/ min deflections occur, producing twelve rows in total for the beam.
- [TSD-8950] - Updated Drawing Settings for SEA
In line with customer feedback, the drawing settings have been updated for the SEA countries of; Philippines, Indonesia, Thailand, Singapore and Malaysia. These will be active by default in a new installation and new files. For an existing installation and files you can update your settings to these as follows:
1. After installing this release, In Home > Settings Import the new settings set for your country and set it as Active.
2. Open an existing file, open Drawing Settings then Load from the Active settings set.
3. If you wish, you can then Save these to your custom global settings by switching the Active settings set to this, then clicking Save in the drawing settings.
4. To update the settings in any other existing models, repeat step 2.
Modeling has never been easier with Tekla Structural Designer. From modeling in 3D or 2D views, to duplicating levels and several built-in tools, Tekla Structural Designer allows you to quickly model any structure. Watch this short video to learn more about some of the tools that will speed up your modeling time. Tekla Tedds is powerful software developed to meet the needs of the structural engineering workflow and designed to help you automate your repetitive structural calculations. Choose from one or more of our regularly updated calculation libraries or write your own, and create professional documentation every time. Combine your structural calculations with 2D frame analysis. This video demonstrates the Tekla Tedds Integrator for Tekla Structures. The Tekla Tedds Integrator is a Tekla Structures Extension which adds features for linking Tekla Tedds calculations to the objects in a Tekla Structures model. Tedds includes a built-in library of structural engineering calculations which can be used to produce high quality calculation documentation for a wide variety of structural building elements which are compliant with a range of regional design codes. The Tekla Integrator can also be used to link user written custom calculations. Tekla software solutions for advanced BIM and structural engineering are produced by Trimble. Trimble’s construction offering ranges from total stations to advanced software, giving the industry tools to transform planning, design, construction and operation of buildings. Tekla software is at the heart of the design and construction workflow, building on the free flow of information, constructible models and collaboration. Product: Tekla Structural DesignVersion: 2024 Suite *Supported Architectures: x64Website Home Page : www.tekla.comLanguage: englishSystem Requirements: PC **Size: 1.0 Gb * Included: Tekla Structural Design Suite 2021 Includes:
- Tekla Structural Designer 2024
- Tekla Tedds 2021 version 23.0.0000
** System Requirements: Tekla Structural Designer 2021 hardware recommendations.
System requirements for effective operation CPU: Multi core Intel i5 Series or above, Xeon or AMD equivalent
- Highest affordable performance recommended.
Memory: 16GB (32GB or more recommended)
- Memory requirements are highly dependent on model content.
OS: 64-bit Microsoft Windows 8.1 / 10
- Operating systems must be running the latest service packs / updates.
Graphics: 1600 x 900 resolution (1920 x 1080 or higher recommended)
- 1GB or higher of dedicated RAM.
- Utilizes HOOPS Visualize, a third party graphics engine available from Tech Soft 3D. To check your adapter’s compatibility visit the HOOPS developer website for HOOPS 20.x, DirectX and OpenGL requirements.
Disk space: 1GB or more of free space for installation
- Operational disk space requirements are highly dependent on model content.
Internet connection: Required for access to Online Services and some documentation.
License Service:
- Tekla Structural License Service 3.00 including Sentinel RMS 9.5
License Server: The latest version of the Tekla Structural Licence Service, at time of release, is shipped and installed with the software. If you have chosen to have a separate licence server, it is always our recommendation that you also run the latest version of the Tekla Structural License Service on it to ensure compatibility. Please see System Requirements for specific version details.
Test environments
The application is tested and supported on the following business versions of Microsoft Windows with the latest updates applied:
- Windows 10 64-bit
- Windows 8.1 64-bit
Tekla Tedds 2020 hardware recommendations:
CPU: Multi core Intel i3 Series or above, Xeon or AMD equivalent
- Highest affordable performance recommended.
Memory: 2GB
- Memory requirements are dependant on document content.
OS: 32-bit or 64bit Microsoft Windows 8.1 / 10
- Operating systems must be running the latest service packs / updates.
- See Test Environments (below) for full details of supported operating systems.
Graphics: 1920 x 1080 resolution
- 1GB or higher of dedicated RAM.
Disk space: 1GB or more of free space for installation.
- Operational disk space requirements are highly dependant on model content.
Internet connection: Required for access to Online Services and some documentation.
Microsoft Word: 32-bit or 64-bit of Microsoft Word 2013, 2016 or 2019.
- Microsoft Word needs to be fully service packed.
License Service:
- Tekla Structural License Service 3.00 including Sentinel RMS 9.5
License Server: The latest version of the Tekla Structural Licence Service, at time of release, is shipped and installed with the software. If you have chosen to have a separate licence server, it is always our recommendation that you also run the latest version of the Tekla Structural License Service on it to ensure compatibility. Please see System Requirements for specific version details.
The application is tested and supported on the following business versions of Microsoft Windows with the latest updates applied:
- Windows 10 32-bit & 64-bit
- Windows 8.1 32-bit & 64-bit
购买后，将显示帖子中所有出售内容。
若发现会员采用欺骗的方法获取财富,请立刻举报,我们会对会员处以2-N倍的罚金,严重者封掉ID!
此段为出售的内容，购买后显示
微博帐号登录