Plexim Plecs Standalone 4.8 | 320.4 mb
PLECS®是电力电子系统高速仿真的首选工具。它有两个版本：PLECS Blockset，用于与MATLAB/® Simulink®无缝集成，以及PLECS Standalone，一个完全独立的产品。 得益于其优化的引擎，PLECS Alone的运行速度比PLECS模块集快得多。凭借全面的模块库，PLECS Standalone 为动态系统仿真提供了经济高效且功能强大的解决方案。专用求解器 专用求解器 PLECS Independent自带用于求解电路方程的引擎。用户可以在可变步长求解器和固定步长求解器之间进行选择。可变时间步长求解器通常是准确高效仿真的首选，因为它们在仿真过程中根据模型动力学采用步长。PLECS Standalone 为刚性和非刚性系统提供优化的隐式和显式可变步长求解器。 采样数据系统 仿真引擎允许用户对采样数据系统进行建模，即仅在不同时间变化的离散系统。用户可以对定期或以可变间隔采样的系统、包含具有不同采样率的模块的系统以及混合连续和离散模块的系统进行建模。 互操作性仿真模型可以通过导入和导出功能与PLECS块集的用户交换。PLECS Standalone 中提供的所有库组件和建模工具也可在 PLECS Blockset 中使用。导入使用 PLECS 块集创建的模型时，将忽略 Simulink 部分。PLECS工具可应用于电力电子工程的许多学科。PLECS采用自上而下的方法构思，有助于对整个系统（包括电源、电源转换器和负载）进行建模和仿真。 PLECS包含一个全面的元件库，涵盖了功率转换系统及其控制的电气、磁、热和机械方面。电力电子电路使用原理图编辑器以电气工程师熟悉和直观的方式捕获。典型的电力电子元件，如半导体、电感器和电容器，被放置在电路图上，只需拉丝连接即可。PLECS独立版是一个自主软件包，用于电力电子系统的时域仿真。 如果独立于其他仿真平台很重要，PLECS独立版为在单一环境中对复杂电路和复杂控制进行建模提供了一体化解决方案。New Features- The new FMU block enables you to include Model-Exchange Functional Mockup Units created by other simulation tools in your PLECS models.PLECS Standalone Only- PLECS has a new default variable-step solver auto that automatically switches from the non-stiff DOPRI solver to the stiff RADAU solver if a model is found to become stiff during a simulation.- The new Model Reference block allows you to reuse a subsystem from one model in another model via a link so that the referencing subsystem is updated automatically when the original subsystem is changed.- The new solver option OutputTimes enables you to specify the time values for which you wish to retrieve output signal values when running a simulation from an Octave script or via the XML-RPC interface. PLECS tools can be applied to many disciplines of power electronics engineering. Conceived with a top-down approach in mind, PLECS facilitates the modeling and simulation of complete systems, including power sources, power converters, and loads. Included with PLECS is a comprehensive component library, which covers the electrical, as well as the magnetic, thermal, and mechanical aspects of power conversion systems and their controls. Power electronics circuits are captured with a schematic editor in a way that is familiar and intuitive for electrical engineers. Typical power electronics components such as semiconductors, inductors and capacitors are placed on the circuit diagram and simply connected by drawing wires. PLECS Standalone is an autonomous software package for time-domain simulation of power electronic systems. If independence from other simulation platforms is important, PLECS Standalone provides the all-in-one solution for modeling complex electrical circuits and sophisticated controls in a single environment. Due to its optimized engine, PLECS Standalone runs much faster than PLECS Blockset. With the comprehensive block library, PLECS Standalone offers a cost-effective yet powerful solution for dynamic system simulation in general. Introduction to PLECS Standalone This tutorial video provides an introduction to PLECS Standalone. The highlights of the video are using the schematic editor and component library, and modeling a simple DC/DC converter, first with an open-loop controller, and then close the loop with a hysteresis type controller. The resulting waveforms are then viewed in the PLECS Scope.Plexim, with locations in Zurich and Boston, is an innovative software company active in the field of technical simulation. For 20 years we have successfully developed and marketed PLECS – the leading simulation software for power electronic systems and electrical drives. In addition, we offer automatic code generation and real-time systems as pioneering technologies for the development and test of controls. Product: Plexim PlecsVersion: Standalone 4.8.6Supported Architectures: x64Website Home Page : www.plexim.comLanguages Supported: englishSystem Requirements: PC *Size: 320.4 mb * System Requirements:
微博帐号登录